Objectif
Development and demonstration of an optical system of sensors for aircraft, based on advanced optical fibre technology. Pressure and acceleration sensors will be investigated. A demonstrating network will be assembled and evaluated providing a set of preliminary results for follow-on work.
Three prototypes of angular encoders were tested. One of them was mounted on a compresser tested in a bench. ( by SNECMA ) The results obtained with this prototype were satisfactory. The 3rd prototype was designed to be linked with an optical harness before the optoelectronic unit for reason of versatility. The BERTIN laboratory tests have shown that this particular utilization has to be avoided. This sensor must be linked to the optoelectronic unit by its own harness without any other interface.
EMI tests (conducted emission, radiated emission, conducted susceptibility, radiated susceptability) were conducted by SNECMA on the angular encoder versus an electromagnetic sensor.
The tests on the pressure sensor ( by BERTIN and SEXTANT ) revealed its sensitivity to the fluid (air or oil) and a small operating temperature range which make it incompatible with aeronautical use.
An accurate fibre Bragg grating wavelength readout system was manufactured with a low cost spectometer by KING'S COLLEGE. A signal processing algorithm was necessary to achieve the high resolution. The tests were performed on 4 multiplexed gratings fabricated on -the same fibre, by KING'S COLLEGE, DEUTSCHE AEROSPACE AIRBUS.
The engine network was designed by BRITISH AEROSPACE, SNECMA and AEROSPATIALE to access the angular encoder and a set of multiplexed sensors (like the pressure sensor one). A multiplexer, using the tree multiplexing techniques, was manufactured for the tests. It was designed to be compatible with an engine core.
The components used in this network all resist high temperature withstanding : multimode graduated index fibre, 820 nm single mode fibre, multiway single and multimode connectors, couplers, delay lines, fused splices. The test results were stisfactory. The fading of the optical signal due to temperature change was under 3 dB. No incompatibily high temperature use was found on the selected components, but no ageing tests were performed. The results on the airframe network showed that FDDI could be sued for this application. The tests on individual components, intermediate assembly or protocol gave correct results on the whole.
The study covers the different aspects of a sensor network and uses new concepts of intrinsic optical fibre sensors. Sensors will be defined and designed by using advanced optical fibre technology, in association with a coherence multiplexing technique and an optical reading system of interferometric type. Two stages have been defined to implement a laboratory demonstrator. The first stage will be devoted to the realization of 2 compatible lines of sensors, one for optical fibre accelerometers and one for optical fibre pressure sensors. The same type of interferometer and data processing unit will be used for each sensor. The second stage will evaluate the complete system with both lines of optical fibre sensors arranged in the same network by using a common interferometer and data processing unit.
The programme of work consists of 8 tasks, defined as follows:
Study of requirements and definition of specifications.
Design of sensor heads, interferometer and processor units.
Development and assembly of sensors and measurements rig.
Study of aircraft system criteria for networking.
Test refinement and reports.
Assembly evaluation and review of system demonstrator.
Guidelines for programme continuation.
Studies for robotic applications.
This project is a pilot phase for the demonstration, through a laboratory rig, of the capability of such a network to be compatible with aircraft system criteria for future development. Parameters of interest such as measurement range and accuracy, environmental conditions (temperature, pressure, vibration, etc), and also number of sensors for multiplexing, network architecture (in terms of safety, redundancy, etc), will be taken into consideration for realistic operational applications. An extension of this sensor system will be studied for robotic applications.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique capteurs capteurs optiques
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique traitement des signaux
- ingénierie et technologie génie mécanique génie automobile génie aérospatial avion
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique capteurs capteurs intelligents
- sciences naturelles sciences physiques optique fibres optiques
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Données non disponibles
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
91404 Orsay
France
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.