Objetivo
Studies on the effects of forging parameters on the microstructure were performed for the nickel-base disc U720L1 resulting in forgings which met the requirements of aero-engine discs.
A total of about 480 specimen tests have been performed allowing the description of disc-relevant material properties in the regime where interactions of creep, fatigue and oxidation can be experienced. In addition to the relevance of data for the two materials concerned, the application can be extended to other materials since the data can be considered to be generic for titanium and nickel-base alloys.
Component tests on model discs have been performed to determine the cyclic crack initiation and propagation life under dwell and non-dwell conditions. These tests results were used to check the applicability of material models to predict component behaviour with the aim to validate these models. In some of these tests the deviations between predicted and actual cyclic lives was unexpectedly high. The failure analyses performed for these cases revealed technological influences specific to component testing such as surface conditions, material defects etc.
For many material properties a number of different models were suitable for representing the behaviour sufficiently. However, the project has identified areas where neither of the models described the material behaviour adequately, and future work will be necessary.
The most comprehensive description of the elasto-plastic material behaviour could be achieved with the constitutive models Bodner-Partom and Chaboche. The computer programs developed for the fitting of parameters and material simulation proved to be valuable tools in predicting material behaviour of specimens and discs.
The aim of the project is to provide a tool to extend the use of engine components subjected to the combined influence of creep, fatigue and oxidation.
The aim shall be achieved by following major steps :
1. Specimen tests to create a generic data base for two classes of disc alloys (nickel-base and titanium alloys) to describe material behaviour at high temperatures under various testing parameters in the transition regime between creep and fatigue.
2. Component tests (cyclic spin pit tests on model disc) to study material behaviour under creep/fatigue/oxidation under realistic conditions of engineering practice.
3. Selection of suitable material models
4. Application of experimental results to fit the constants of the material models
5. Application of the models for the prediction of the cyclic spin pit tests
6. Assessment of the alternative models with respect to the representation of experimental data, applicability to practical design procedures and accuracy of life prediction
7. Validation of models
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias naturales ciencias químicas electroquímica electrólisis
- ciencias naturales ciencias químicas química inorgánica metales de transición
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
MUENCHEN
Alemania
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.