Objectif
The aim of the project is to provide essential technological and theoretical tools for industrial applications of overinjection of short fibre reinforced thermoplastics into continuous fibre reinforced thermoplastics bases
The aim of the project is to provide essential technological and theoretical tools for industrial applications of overinjection of short fibre reinforced thermoplastics into continuous fibre reinforced thermoplastic bases. This research will lead to new capabilities in specifying a suitable heating system for the base such that the surface of the base will remain hot during the injection phase. An overinjection tool will also be designed with facilities for clamping and sealing the base. The project will also simulate the flow in a tool with a heated base fixed within the tool cavity, and consider the effects of processing conditions on the bond strength of an overinjected component. The project will conclude by design and manufacturing a real life overinjected product.
Sample overinjection items have been manufactured and analysed. 2 moulds producing different overinjected shapes have been designed, fabricated and commissioned. The thermomechanical properties of materials under consideration have been obtained experimentally.
The process parameters which effect the performance of items manufactured by the overinjection process have been identified. Those parameters which maximize the bond strength between base and overitem have been optimized. Parameters which decrease the formation of voids, decrease the amount of shrinkage and warpage have also been identified. The overinjection process can be successfully applied to the manufacture of industrial components, as demonstrated by the production of an industrial prototype.
The available software packages which attempt to simulate numerically the fibre flow during the overinjection process have several limitations. A number of these limitations have been overcome but the requirement for full 3-dimensional calculations has also been demonstrated.
An approach to the finite element modelling of the thermomechanical response of a thermoplastic during processing has been developed. The technique of varying the finite element mesh at different stages of the overinjection process appears to work satisfactorily.
The 2 major sources of defects to overinjected products are shrinkage and inadequate wetting of the base. However, these sources are not peculiar to the overinjection process but are generally associated with injection moulding. Consequently, solutions to these defects are to be found among those universally applied to injection moulding.
Particular attention has been taken to develop techniques that are applicable to a broad spectrum of applications. The commercial viability of the process has been demonstrated by successfully designing, fabricating and testing an industrial prototype.
An initial investigation into the potential market for overinjection has uncovered a number of suitable products.
This research will lead to new capabilities in specifying a suitable heating system for the base such that the surface of the base will remain hot during the injection phase. An overinjection tool will also be designed with facilities for clamping and sealing the base. The project will also simulate the flow in a tool with a heated base fixed within the tool cavity, and consider the effects of processing conditions on the bond strength of an overinjected component. The project will conclude by design and manufacturing a real life ovreinjected product.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles informatique et science de l'information logiciel
- ingénierie et technologie génie mécanique ingénierie thermodynamique
- ingénierie et technologie ingénierie des materiaux composites
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Données non disponibles
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Données non disponibles
Coordinateur
90 GALWAY
Irlande
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.