Ziel
The aim of the project is to provide essential technological and theoretical tools for industrial applications of overinjection of short fibre reinforced thermoplastics into continuous fibre reinforced thermoplastics bases
The aim of the project is to provide essential technological and theoretical tools for industrial applications of overinjection of short fibre reinforced thermoplastics into continuous fibre reinforced thermoplastic bases. This research will lead to new capabilities in specifying a suitable heating system for the base such that the surface of the base will remain hot during the injection phase. An overinjection tool will also be designed with facilities for clamping and sealing the base. The project will also simulate the flow in a tool with a heated base fixed within the tool cavity, and consider the effects of processing conditions on the bond strength of an overinjected component. The project will conclude by design and manufacturing a real life overinjected product.
Sample overinjection items have been manufactured and analysed. 2 moulds producing different overinjected shapes have been designed, fabricated and commissioned. The thermomechanical properties of materials under consideration have been obtained experimentally.
The process parameters which effect the performance of items manufactured by the overinjection process have been identified. Those parameters which maximize the bond strength between base and overitem have been optimized. Parameters which decrease the formation of voids, decrease the amount of shrinkage and warpage have also been identified. The overinjection process can be successfully applied to the manufacture of industrial components, as demonstrated by the production of an industrial prototype.
The available software packages which attempt to simulate numerically the fibre flow during the overinjection process have several limitations. A number of these limitations have been overcome but the requirement for full 3-dimensional calculations has also been demonstrated.
An approach to the finite element modelling of the thermomechanical response of a thermoplastic during processing has been developed. The technique of varying the finite element mesh at different stages of the overinjection process appears to work satisfactorily.
The 2 major sources of defects to overinjected products are shrinkage and inadequate wetting of the base. However, these sources are not peculiar to the overinjection process but are generally associated with injection moulding. Consequently, solutions to these defects are to be found among those universally applied to injection moulding.
Particular attention has been taken to develop techniques that are applicable to a broad spectrum of applications. The commercial viability of the process has been demonstrated by successfully designing, fabricating and testing an industrial prototype.
An initial investigation into the potential market for overinjection has uncovered a number of suitable products.
This research will lead to new capabilities in specifying a suitable heating system for the base such that the surface of the base will remain hot during the injection phase. An overinjection tool will also be designed with facilities for clamping and sealing the base. The project will also simulate the flow in a tool with a heated base fixed within the tool cavity, and consider the effects of processing conditions on the bond strength of an overinjected component. The project will conclude by design and manufacturing a real life ovreinjected product.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Naturwissenschaften Informatik und Informationswissenschaften Software
- Technik und Technologie Maschinenbau Thermodynamik
- Technik und Technologie Werkstofftechnik Verbundwerkstoffe
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Daten nicht verfügbar
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Daten nicht verfügbar
Koordinator
90 GALWAY
Irland
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.