Objetivo
Systems currently exist for the laser cutting of complex shapes, at high speeds, using pre-stored paths. However, when the cut has to be positioned precisely with respect to features on the material, the cutting is normally performed manually as there are currently no systems available capable of tracking complex edges at high speeds and adaptively modifying the cut position. This tracking is especially important for the cutting of pliable materials, for example the cutting of embroidered patterns from their base material.
This research programme aims to develop an high speed laser cutting machine with a high speed vision based following capability which will allow the following and cutting of complex patterns from pliable and rigid substrate.
This research will have applications in European textile industries where they are having to overcome competition from non-European sources by the Introduction of heavily automated machinery The system will also have applications in the European automotive industry where composite structures are now being manufactured reinforced with embroidered components.
The workprogramme contains three major activities namely:
1. The development of a high speed vision and image processing system capable of analysing 1000 images per second.
Currently available commercial seam following sensors have an update time of 20 ms (this is a function of the mains frequency 50 HZ). The proposed system has a much faster update time of 1 ms per frame. During this update time a detailed analysis of the image is carried out using parallel processing (transputer - T9000) techniques. Quantitative values of the seam shape and the width of cut will be produced by the image processing algorithms. This is in far more detail than obtained by the present slow sensors system.
2. The development of an advanced control system to allow
modifications from the vision system to update the cutting path in real time.
Current controllers for laser cutting systems use stored data to construct the cutting path.The proposed controller will be receiving information from the vision system. This information will be used to adaptively modify the path in real time. To achieve this will require the development of novel control strategies as current control systems normally limit the update rate to 50 Hz, whilst this system is intended to operate at 1000 Hz.
3. The development of a gantry system capable of cutting complex shapes at speeds of up to 1000 mm/s.
The current gantry tables for cloth cutting have been developed for use with pre-stored paths. This allows the accelerations of the cutting head to be precisely controlled so that it will always remain within tolerance. However, the uncertainty in the path position will require constant recalculations of the accelerating forces. Therefore the gantry developed will have to be capable of withstanding these high forces whilst remaining rigid. This will require an in-depth study of the dynamics of the gantry movements and the cutting table. The proposed sensors for the feature following will require the orientation to be in-line with the direction of cutting. Therefor a wrist mechanism will require development which will house the camera system. This wrist will have to rotate at high speeds (15 rev/s) when cutting at high speed, to allow the system to cut around complex shapes with a high degree of accuracy (0.1 mm).
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información ingeniería electrónica sistemas de automatización y control
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información ingeniería electrónica sensores sensores ópticos
- ingeniería y tecnología ingeniería mecánica ingeniería de vehículos ingeniería automotriz
- ingeniería y tecnología ingeniería de materiales textiles
- ciencias naturales ciencias físicas óptica física del láser
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
59127 Walincourt
Francia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.