Obiettivo
Systems currently exist for the laser cutting of complex shapes, at high speeds, using pre-stored paths. However, when the cut has to be positioned precisely with respect to features on the material, the cutting is normally performed manually as there are currently no systems available capable of tracking complex edges at high speeds and adaptively modifying the cut position. This tracking is especially important for the cutting of pliable materials, for example the cutting of embroidered patterns from their base material.
This research programme aims to develop an high speed laser cutting machine with a high speed vision based following capability which will allow the following and cutting of complex patterns from pliable and rigid substrate.
This research will have applications in European textile industries where they are having to overcome competition from non-European sources by the Introduction of heavily automated machinery The system will also have applications in the European automotive industry where composite structures are now being manufactured reinforced with embroidered components.
The workprogramme contains three major activities namely:
1. The development of a high speed vision and image processing system capable of analysing 1000 images per second.
Currently available commercial seam following sensors have an update time of 20 ms (this is a function of the mains frequency 50 HZ). The proposed system has a much faster update time of 1 ms per frame. During this update time a detailed analysis of the image is carried out using parallel processing (transputer - T9000) techniques. Quantitative values of the seam shape and the width of cut will be produced by the image processing algorithms. This is in far more detail than obtained by the present slow sensors system.
2. The development of an advanced control system to allow
modifications from the vision system to update the cutting path in real time.
Current controllers for laser cutting systems use stored data to construct the cutting path.The proposed controller will be receiving information from the vision system. This information will be used to adaptively modify the path in real time. To achieve this will require the development of novel control strategies as current control systems normally limit the update rate to 50 Hz, whilst this system is intended to operate at 1000 Hz.
3. The development of a gantry system capable of cutting complex shapes at speeds of up to 1000 mm/s.
The current gantry tables for cloth cutting have been developed for use with pre-stored paths. This allows the accelerations of the cutting head to be precisely controlled so that it will always remain within tolerance. However, the uncertainty in the path position will require constant recalculations of the accelerating forces. Therefore the gantry developed will have to be capable of withstanding these high forces whilst remaining rigid. This will require an in-depth study of the dynamics of the gantry movements and the cutting table. The proposed sensors for the feature following will require the orientation to be in-line with the direction of cutting. Therefor a wrist mechanism will require development which will house the camera system. This wrist will have to rotate at high speeds (15 rev/s) when cutting at high speed, to allow the system to cut around complex shapes with a high degree of accuracy (0.1 mm).
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sistemi di controllo
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sensori sensori ottici
- ingegneria e tecnologia ingegneria meccanica ingegneria dei veicoli ingegneria dell'autoveicolo
- ingegneria e tecnologia ingegneria dei materiali tessuti
- scienze naturali scienze fisiche ottica fisica dei laser
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
59127 Walincourt
Francia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.