Objetivo
The best materials for the blades (and vanes) of the hottest zone of gas turbine are today the Ni base superalloys tolerating a metal temperature of 950 1000C as protected against HT oxidation by an overlay of MCrAIY alloy or aluminides. At metal temperatures above 1000 C, the diffusion of Ni from the substrate to overlay destroys the oxidation resistance of the overlay, and vice versa, the diffusion of Al from the overlay to substrate embrittles the upper layers of the substrate. Therefore, suitable diffusion barriers are needed between the superalloy substrate and the overlay in order to make the metal temperatures above 1000 C applicable in the blades of gas turbines. In the inter European research programme COST 501, effective diffusion barriers were developed in 3 different stages reaching a capability to stop the diffusion at 1150 C in air for at least 400 hrs. The barriers were of a thickness of 1 4.5 micrometers. In spite of the success in stopping the harmful diffusions, the coated specimens with diffusion barriers and overlays suffered from disbanding and spalling in simulating burner rig tests, especially on the concave side of the blades. Therefore, the aim of the present basic research project is to develop sufficient bonding layers for these diffusion barriers so that they can be applied in gas turbines of power stations as well as of aircraft's, at metal temperatures of 1050 1100 C and 1100 1150 C, respectively. In the case of air cooled blades, the inlet temperatures of the gas would correspondingly be about 1250 C and 1350 C, and with hollow blades somewhat more. This would mean an increase of efficiency by about 5 %, and, in the case of aircraft's, a reduction of fuel consumption by about I %. On European level, the former would mean in the EU countries a saving of about 30 TWh/a in electricity generation, equal to about 1500 MECU/a; and the latter a saving of about 260 MECU/a. Of course, these savings can be achieved first as the results of the present basic research project are further developed to an industrial practice, e.g. by help of a subsequent B/E project. Thus, the objective of the present project is to produce a checked and certified basis for a larger industrial B/E project to search the above possibilities of the total development.
The project will be done in joint collaboration by 2 university units, I research center, and 3 companies in 4 different EU member countries, so that the development of gradient bondings and the laboratory scale structural studies and testing of properties will be done in the university units, the development of NDT testing and inspection in the research center, the simulating furnace and burner rig tests for landbase and aircraft turbines in one of the end user companies and in one of the university units, respectively. The evaluation of the results and the planning of the subsequent industrial project will be done jointly. The applicability of the results for the production of SMEs will be evaluated by one of the companies. The exploitation and dissemination of the results will be lead by a special Exploitation Manager from one of the end user companies. Totally the project will be composed of 6 different tasks with their own task leaders, and the tasks containing totally 20 sub tasks with own sub task leaders. The project takes a time of 4 years, but after 32 months there will be a mid term assessment, which depending on the received results decides the continuation.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información industria electrotécnica ingeniería eléctrica generación de energía eléctrica
- ciencias naturales ciencias químicas electroquímica electrólisis
- ingeniería y tecnología ingeniería mecánica ingeniería de vehículos ingeniería aeroespacial aeronave
- ingeniería y tecnología ingeniería ambiental energía y combustibles
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
33101 Tampere
Finlandia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.