Ziel
The best materials for the blades (and vanes) of the hottest zone of gas turbine are today the Ni base superalloys tolerating a metal temperature of 950 1000C as protected against HT oxidation by an overlay of MCrAIY alloy or aluminides. At metal temperatures above 1000 C, the diffusion of Ni from the substrate to overlay destroys the oxidation resistance of the overlay, and vice versa, the diffusion of Al from the overlay to substrate embrittles the upper layers of the substrate. Therefore, suitable diffusion barriers are needed between the superalloy substrate and the overlay in order to make the metal temperatures above 1000 C applicable in the blades of gas turbines. In the inter European research programme COST 501, effective diffusion barriers were developed in 3 different stages reaching a capability to stop the diffusion at 1150 C in air for at least 400 hrs. The barriers were of a thickness of 1 4.5 micrometers. In spite of the success in stopping the harmful diffusions, the coated specimens with diffusion barriers and overlays suffered from disbanding and spalling in simulating burner rig tests, especially on the concave side of the blades. Therefore, the aim of the present basic research project is to develop sufficient bonding layers for these diffusion barriers so that they can be applied in gas turbines of power stations as well as of aircraft's, at metal temperatures of 1050 1100 C and 1100 1150 C, respectively. In the case of air cooled blades, the inlet temperatures of the gas would correspondingly be about 1250 C and 1350 C, and with hollow blades somewhat more. This would mean an increase of efficiency by about 5 %, and, in the case of aircraft's, a reduction of fuel consumption by about I %. On European level, the former would mean in the EU countries a saving of about 30 TWh/a in electricity generation, equal to about 1500 MECU/a; and the latter a saving of about 260 MECU/a. Of course, these savings can be achieved first as the results of the present basic research project are further developed to an industrial practice, e.g. by help of a subsequent B/E project. Thus, the objective of the present project is to produce a checked and certified basis for a larger industrial B/E project to search the above possibilities of the total development.
The project will be done in joint collaboration by 2 university units, I research center, and 3 companies in 4 different EU member countries, so that the development of gradient bondings and the laboratory scale structural studies and testing of properties will be done in the university units, the development of NDT testing and inspection in the research center, the simulating furnace and burner rig tests for landbase and aircraft turbines in one of the end user companies and in one of the university units, respectively. The evaluation of the results and the planning of the subsequent industrial project will be done jointly. The applicability of the results for the production of SMEs will be evaluated by one of the companies. The exploitation and dissemination of the results will be lead by a special Exploitation Manager from one of the end user companies. Totally the project will be composed of 6 different tasks with their own task leaders, and the tasks containing totally 20 sub tasks with own sub task leaders. The project takes a time of 4 years, but after 32 months there will be a mid term assessment, which depending on the received results decides the continuation.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Elektrotechnik, Elektronik, Informationstechnik elektrotechnische Industrie Starkstromtechnik Stromerzeugung
- Naturwissenschaften Chemiewissenschaften Elektrochemie Elektrolyse
- Technik und Technologie Maschinenbau Fahrzeugbau Luft- und Raumfahrttechnik Flugzeug
- Technik und Technologie Umwelttechnik Energie und Kraftstoffe
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
33101 Tampere
Finnland
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.