Objectif
Task 1.1. Decomposition of the Machine Tool for R&A analysis, machine tool builders and end-users view on critical components and events.
Task 1.2. Definition of suitable information required for R&A design, Life Cycle Cost trade-off analysis, choice of critical components, failures and needed signals for condition monitoring.
Task 1.3. Development of the REACH database SW and the link between the database and existing CAD systems.
Task 2.1. Definition of sampling plans and procedures for the machine tool builders and end-users data collection, preliminary analysis of the necessary statistical algorithms for components R&A evaluation.
Task 2.2. Definition and development of two test benches for accelerated life tests on machine tools critical components.
Task 2.3. Development of the CNC data acquisition SW for condition monitoring, integrating control internal signals and external sensors.
Task 3.1. Preliminary evaluation of collected data, development of an integrated test and simulation model for R&A performance evaluation and design platform, development of new R&A design guidelines and methodologies.
Task 3.2. Development of the condition monitoring modules for improvement of the R&A performances of existing machine tools, development of the lifetime estimating algorithms based on load history and of the MMI extension for parameterization and display of the results. This is a running task.
Task 4.1. Verification of the new design methodology, the integrated test and simulation model for R&A performances, redesign of machine tool parts.
Task 4.2. Verification of the developed Condition Monitoring system in the partners machine tools.
High maintenance costs and production losses resulting from machine breakdowns are pressing problems for today's manufacturers. In order to increase the reliability and availability (R&A) of machine tools and manufacturing systems, two major problems must be solved: - How to take the right design decision for maximum reliability, starting from the early stages of machine development? - How to continuously obtain in-process data about the actual state of the machine and its components as a basis for targeted and highly efficient maintenance? Both issues are closely linked. Taking the proper design decisions requires information about the behaviour of the machine components under realistic loads. These loads are today widely unknown, except for laboratory data which does not reflect actual load cases, load history and interdependencies between components. Based on a powerful system for large-scale measurements of real operating loads new design methods and supporting software-systems can close the information gap between machine tool design and real process loads. On the other hand, such a system can be used as well to continuously monitor the actual machine conditions during operation. Thus machine downtime for unpredictable breakdowns can be prevented. It is the objective of this project to improve the R&A of machine tools by using control-internal signals for solving the mentioned two problems. At modern machine tools signals of digital drives are easily accessible and can be processed by control-intemal software applications. This makes it easy to apply such a software to many machines at little costs. Thus these control-internal signals will be used by the here to be developed system in two ways: - for new design methodologies taking reliability and availability into account. This enables a prediction and planning of R&A supported by here developed software tools; and - for a condition monitoring system being directly implemented into the control and thus enabling direct access to important information. This also contains the data acquisition for the design process. It is expected that with the help of this integrated two-fold approach the following results can be achieve within a period of two-three years after the end of the project: - Increase of the actual average machine tool Availability from 90-93% to 99% - Increase of the actual average production systems Availability from 75-80% to 90-95% - Reduction of about 20% (for the end-users) of the operating, support and lack of production total costs.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles informatique et science de l'information bases de données
- lettres histoire et archéologie histoire
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique capteurs
- sciences naturelles informatique et science de l'information logiciel logiciel d’application
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
10095 GRUGLIASCO
Italie
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.