Objectif
Objectives and content
In the field of thin films for wear applications, a large
research effort is devoted to the preparation of
superhard crystalline thin films. Effectively, hardness
is required for abrasive wear resistance and covalent
hard coatings are interesting for low sticking and low
friction. Although diamond and cubic boron nitride are
ultrahard materials, owing to its instability at high
temperatures, diamond cannot be used, for example, in
cutting tools for steel. Problems of adhesion and
internal stress of this kind of coatings have been also
found. For these reasons and for the need of replace
expensive diamond in many applications, new hard
materials with comparable or even superior properties are
required. New carbon nitride compounds have been
predicted to be stable with hardness comparable to that
of diamond.
The first objective of the present project is to
establish reproducible synthesis routes of new carbon
nitride (CNX, C3N4, M-CNX with M=Si,B) hard coatings.
The methods reported up to now in the literature and also
new developed routes of preparation will be tested within
the project. The second objective of the project is the
evaluation of the physical and chemical characteristics
of the films in respect to their practical applications.
Hardness, friction coefficient, adhesion, thermal and
electrical conductivity, chemical resistance, light
transparency, among other properties will be evaluated.
The control of the preparation parameters to obtain
microcrystalline or nanocrystalline films that can
combine ultrahard conditions with good tribological and
wear properties is another goal of the project.
Industrial applications of superhard materials so far
have been dominated by superabrasives. In particular the
difficult-to-cut materials like steels, MMC's
(Al+1020%SiC) and INCONEL are of fundamental interest in
Automotive, Aircraft, Defence, Space, Electronic and
Sporting industry.
The test of carbon nitride coated tools in industrial
conditions is the final objective of the project. In
aeronautical field, for instance, the application of this
kind of tools could reduce the machining time of the
component from 20% up to 60%. The cost reduction per
component machined could be evaluated approximately 35%.
The know-how of difficult-to-cut materials with coated
tools, the technical and economical analysis of the
processes developed during the project and the design of
a demonstrator manufactured using the developed tools
complete the work plan of the present project. The
possible applications of the new carbon nitride coatings
for optical or electronic devices will be also
considered.
The Consortium comprises two research centres (ICMSE,
ILM-CNR) and two laboratories at the University (ECL;
UAM) experienced in the field of synthesis and
characterisation of thin films and coatings, a complex
tool manufacturer (VERGNANO), a manufacturer and supplier
of equipment for preparation of coatings at industrial
scale (HEF), a company for ion implantation and surface
modification on industrial tools (AIN) and an end-user
from the Automotive and Aerospace industry (FIAT).
Brite Euram III Areas covered by the proposal are 2.1
2.3 and 2.2.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles sciences physiques électromagnétisme et électronique
- ingénierie et technologie génie mécanique génie automobile génie aérospatial avion
- ingénierie et technologie génie mécanique ingénierie de fabrication fabrication soustractive
- ingénierie et technologie ingénierie des materiaux revêtement et films
- sciences naturelles sciences chimiques chimie inorganique métalloïde
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
10043 ORBASSANO
Italie
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.