Objetivo
Powder metallurgy (P/M) is the major manufacturing route for a wide range of industrial parts such as transmission and gearbox steel parts for automotive, cem ented carbides and high speed steels for metal-, wood- or stone-working, magnet s and soft magnetic materials, fine ceramics, refractory metals, bearings... A ll these parts are produced by cold pressing a powder in a die and sintering th e resulting green body in a furnace. Although the problems are different in d etails, all these branches encounter the same practical difficulties: - in most cases, a post-sintering operation (sizing or machining) is necessary to obtain the final geometry of the parts. This operation represents 10% to 25% of the p roduction costs. - a tool set for die pressing costs between 1.000 and 100.000 ECU. The design of a tool set for a new product is made with a trial-and-error procedure that generates overcosts (up to 50% of the initial tooling costs) and delays (several weeks or months). - about 2% (and far more for new fabrication s) of the parts are defective due to the presence of cracks. The need of a fina l control and the value of the rejected parts strongly increase the global prod uction costs. Savings for European industry estimated between 100 and 150 MECU appear to be possible on development and production costs and time-to-market co uld be markedly improved: - if the as-sintered parts could be more accurate, - if the tool design could be based on reliable predictive methods, - if the proc ess could be well designed, so that no cracks occur. This could be obtained by replacing the common trial-and-error procedure by a more efficient approach usi ng predictive methods based on numerical simulation. Consequently, the objectiv e of the MC2 Project is to develop the industrial modelling of the whole P/M pr ocess for the wide range of materials concerned by this technique. It is expect ed that crack-free parts with high geometrical accuracy (10 pm or 0.1%) and den sity homogeneity can routinely be produced, if the design of the parts, of the pressing tools and of the pressing schedule is based on a numerical simulation that integrates the knowledge generated experimentally and theoretically in thi s project. To achieve this goal, the technical programme will include - the se lection and implementation of existing macromechanical models for cold compacti on, friction and sintering in suitable finite element codes - the experimental determination of materials data for several reference materials - the validat ion and optimization of the numerical modelling, the simulation and the fabrica tion of reference parts - the comparison between computed and experimental res ults in term of geometry, density distribution, residual stresses and mechanica l strength. The project will end with the specification and the design of an i ndustrial modelling tool usable in all powder industries. The MC2 project is pr esented with the full support of the European Powder Metallurgy Association (EP MA) which represents 80 companies or manufacturing groups i.e. 80% of the Europ ean Powder Metals Industry (see letter in Appendix). The proposed project will comply with the aims and objectives of Brite Euram III programme in the general technical areas 2.1.1 .M (New more accurate and energy efficient near net shap e powder metallurgy to reduce costs, energy and waste in the mass production of components), 2.2.1.S 2.2.2.S.The MC2 project is proposed in the scope of PM- MODNET , a Thematic Network funded by the EC in the frame of the IMT Programme (n BETN-0010). The objective of this Network coordinated by the EPMA is to exa mine the possibility to initiate projects on the modelling of P/M processes.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias naturales ciencias químicas química inorgánica compuestos inorgánicos
- ingeniería y tecnología ingeniería mecánica ingeniería de fabricación fabricación sustractiva
- ciencias naturales matemáticas matemáticas puras geometría
- ingeniería y tecnología ingeniería de materiales cerámica
- ingeniería y tecnología ingeniería de materiales metalurgia
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
38054 Grenoble
Francia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.