Objectif
Powder metallurgy (P/M) is the major manufacturing route for a wide range of industrial parts such as transmission and gearbox steel parts for automotive, cem ented carbides and high speed steels for metal-, wood- or stone-working, magnet s and soft magnetic materials, fine ceramics, refractory metals, bearings... A ll these parts are produced by cold pressing a powder in a die and sintering th e resulting green body in a furnace. Although the problems are different in d etails, all these branches encounter the same practical difficulties: - in most cases, a post-sintering operation (sizing or machining) is necessary to obtain the final geometry of the parts. This operation represents 10% to 25% of the p roduction costs. - a tool set for die pressing costs between 1.000 and 100.000 ECU. The design of a tool set for a new product is made with a trial-and-error procedure that generates overcosts (up to 50% of the initial tooling costs) and delays (several weeks or months). - about 2% (and far more for new fabrication s) of the parts are defective due to the presence of cracks. The need of a fina l control and the value of the rejected parts strongly increase the global prod uction costs. Savings for European industry estimated between 100 and 150 MECU appear to be possible on development and production costs and time-to-market co uld be markedly improved: - if the as-sintered parts could be more accurate, - if the tool design could be based on reliable predictive methods, - if the proc ess could be well designed, so that no cracks occur. This could be obtained by replacing the common trial-and-error procedure by a more efficient approach usi ng predictive methods based on numerical simulation. Consequently, the objectiv e of the MC2 Project is to develop the industrial modelling of the whole P/M pr ocess for the wide range of materials concerned by this technique. It is expect ed that crack-free parts with high geometrical accuracy (10 pm or 0.1%) and den sity homogeneity can routinely be produced, if the design of the parts, of the pressing tools and of the pressing schedule is based on a numerical simulation that integrates the knowledge generated experimentally and theoretically in thi s project. To achieve this goal, the technical programme will include - the se lection and implementation of existing macromechanical models for cold compacti on, friction and sintering in suitable finite element codes - the experimental determination of materials data for several reference materials - the validat ion and optimization of the numerical modelling, the simulation and the fabrica tion of reference parts - the comparison between computed and experimental res ults in term of geometry, density distribution, residual stresses and mechanica l strength. The project will end with the specification and the design of an i ndustrial modelling tool usable in all powder industries. The MC2 project is pr esented with the full support of the European Powder Metallurgy Association (EP MA) which represents 80 companies or manufacturing groups i.e. 80% of the Europ ean Powder Metals Industry (see letter in Appendix). The proposed project will comply with the aims and objectives of Brite Euram III programme in the general technical areas 2.1.1 .M (New more accurate and energy efficient near net shap e powder metallurgy to reduce costs, energy and waste in the mass production of components), 2.2.1.S 2.2.2.S.The MC2 project is proposed in the scope of PM- MODNET , a Thematic Network funded by the EC in the frame of the IMT Programme (n BETN-0010). The objective of this Network coordinated by the EPMA is to exa mine the possibility to initiate projects on the modelling of P/M processes.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles sciences chimiques chimie inorganique composé inorganique
- ingénierie et technologie génie mécanique ingénierie de fabrication fabrication soustractive
- sciences naturelles mathématiques mathématiques pures géométrie
- ingénierie et technologie ingénierie des materiaux céramique
- ingénierie et technologie ingénierie des materiaux métallurgie
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
38054 Grenoble
France
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.