Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-06-12

Innovative complete production line for the manufacture of slate flooring tiles

Objetivo



The growth potential of the slate sector would be enhanced by the introduction of automated productions. Thus, the aim of this project is to design a prototype of an automated line for the production of flooring slate tiles. The main objectives can be summarized as follow: -To create new slate products (flooring tiles, platforms, steps etc.) with similar finish than other ornamental rocks as marble and granite, but with different properties: slate plaquettes with four bevelling edges and of a very uniform thikness (up to 0,5 mm variations). Therefore, new products of high quality will be introduced in the construction sector. -To automate the production of slate flooring tiles, that would involve an increase in finished tiles from 25 m2/day to 300 m2/day and would satisfy the existing market demand. -To increase over 25% the material utilization in the cutting process. The research, directed to obtain an automated line for the production of flooring slate tiles. should be approached as follows: Raw material study. An analysis of the physical qualities of the stone will determine the characteristics of the cutting diamond and the calibration process. Design and building of the prototype considering: a new cutting process for slate flooring tiles, with a precision of +/-0,3 mm, a machine to even out the block edges after cutting, a calibrating machine to even the bottom side to give a surface parallel to the top after exfoliation, rectification of up to 3 mm and three calibration heads will be required, a washing tunnel, two drying tunnels (after washing and waxing respectively), a waxing tunnel including an analysis of wax behaviour to optimize the process. Some transport methods between one stage and the next.

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Este proyecto aún no se ha clasificado con EuroSciVoc.
Sugiera los ámbitos científicos que considere más relevantes y ayúdenos a mejorar nuestro servicio de clasificación.

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

Datos no disponibles

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

EAW - Exploratory awards

Coordinador

Pizarras Villar del Rey
Aportación de la UE
Sin datos
Dirección
S/N,Finca el Bodonal
06192 Villar del Rey - Badojoz
España

Ver en el mapa

Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos
Mi folleto 0 0