The development of an automated system for the cutting and planting of rose cuttings

Informations projet

N° de convention de subvention: BRST960323

Projet clôturé

Date de début 31 Octobre 1996

Date de fin 31 Octobre 1997

Financé au titre de

• Specific research and technological development programme in the field of industrial and materials technologies, 1994-1998

Coût total Aucune donnée

Contribution de l’UE Aucune donnée

Coordonné par

Boomkwekerij Bert Rombouts B.V.
Netherlands

Objectif

The propagation of roses by cuttings is one of the most applied (propagation) methods. At present the cutting and planting of pot roses is a manual process/procedures. The rnajor (technical) limitations are the low productivity and the variations in quality. Moreover, it is a boring job. Therfore, the objective ofthe intended R&D-project is to develop an automated system for the cutting and planting of rose cuttings which has the following specifications: 1) a high productivity (2 7200 cuttings/h), 2) a high and uniform quality, and 3) a short through-put time (reduction of the chance of infection). The proposed system will be composed of a number of innovative techniques, such as a recognition (vision) system, a robotic system and a handling clip system. Preliminary estimates show that the potential benefits (industrial impact) of such a system are favourable compared to the (development) costs. A prototype will be built whicch will provides the data for the design of a commercial automated system for the cutting and planting of rose cuttings. The consortium consists of developers and endusers ofthe proposed system.
The propagation of roses by cuttings is one of the most applied (propagation) methods. At present the cutting and planting of pot roses is a manual process/procedures. The major (technical) limitations are the low productivity and the variations in quality. Moreover, it is a boring job. Therefore, the objective of the intended R&D-project is to develop an automated system for the cutting and planting of rose cuttings which has the following specifications: 1) a high productivity (2 7200 cuttings/h), 2) a high and uniform quality, and 3) a short through-put time (reduction of the chance of infection). The proposed system will be composed of a number of innovative techniques, such as a recognition (vision) system, a robotic system and a handling clip system. Preliminary estimates show that the potential benefits (industrial impact) of such a system are favourable compared to the (development) costs. A prototype will be built which will provide the data for the design of a commercial automated system for the cutting and planting of rose cuttings. The consortium consists of developers and end-users of the proposed system.

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN.

• ingénierie et technologie › génie électrique, génie électronique, génie de l’information › ingénierie électronique › système d’automatisation et de contrôle
• sciences sociales › économie et affaires › économie › économie de la production › productivité

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Programme(s)

• FP4-BRITE/EURAM 3 - Specific research and technological development programme in the field of industrial and materials technologies, 1994-1998

Thème(s)

• 0101 - Incorporation of new technologies into production systems

Appel à propositions

Data not available

Régime de financement

EAW - Exploratory awards

Coordinateur

Boomkwekerij Bert Rombouts B.V.

• Contribution de l’UE: Aucune donnée
• Adresse: 1,De Steenakkers 1 ; 5527 Hapert ; Pays-Bas
• Coût total: Aucune donnée