Skip to main content
European Commission logo
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2024-06-10

The development of an automated system for the cutting and planting of rose cuttings

Cel



The propagation of roses by cuttings is one of the most applied (propagation) methods. At present the cutting and planting of pot roses is a manual process/procedures. The rnajor (technical) limitations are the low productivity and the variations in quality. Moreover, it is a boring job. Therfore, the objective ofthe intended R&D-project is to develop an automated system for the cutting and planting of rose cuttings which has the following specifications: 1) a high productivity (2 7200 cuttings/h), 2) a high and uniform quality, and 3) a short through-put time (reduction of the chance of infection). The proposed system will be composed of a number of innovative techniques, such as a recognition (vision) system, a robotic system and a handling clip system. Preliminary estimates show that the potential benefits (industrial impact) of such a system are favourable compared to the (development) costs. A prototype will be built whicch will provides the data for the design of a commercial automated system for the cutting and planting of rose cuttings. The consortium consists of developers and endusers ofthe proposed system.
The propagation of roses by cuttings is one of the most applied (propagation) methods. At present the cutting and planting of pot roses is a manual process/procedures. The major (technical) limitations are the low productivity and the variations in quality. Moreover, it is a boring job. Therefore, the objective of the intended R&D-project is to develop an automated system for the cutting and planting of rose cuttings which has the following specifications: 1) a high productivity (2 7200 cuttings/h), 2) a high and uniform quality, and 3) a short through-put time (reduction of the chance of infection). The proposed system will be composed of a number of innovative techniques, such as a recognition (vision) system, a robotic system and a handling clip system. Preliminary estimates show that the potential benefits (industrial impact) of such a system are favourable compared to the (development) costs. A prototype will be built which will provide the data for the design of a commercial automated system for the cutting and planting of rose cuttings. The consortium consists of developers and end-users of the proposed system.

Zaproszenie do składania wniosków

Data not available

System finansowania

EAW - Exploratory awards

Koordynator

Boomkwekerij Bert Rombouts B.V.
Wkład UE
Brak danych
Adres
1,De Steenakkers 1
5527 Hapert
Niderlandy

Zobacz na mapie

Koszt całkowity
Brak danych