Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-06-12

Innovative complete production line for the manufacturing of slate flooring tiles

Objectif



The growth potential of the slate sector would be enhanced by the introduction of automated productions. Thus, the aim of this project is to design a prototype of an automated line for the production of flooring slate tiles. The main objectives can be summarized as follow : - To create new slate products (flooring tiles, platforms, steps etc.) with similar finish than other ornamental rocks as marble and granite, but with different properties : slate plaquettes with four bevelling edges and of a very uniform thikness (up to 0,5 mm variations). Therefore, new products of high quality will be introduced in the construction sector. - To automate the production of slate flooring tiles, that would involve an increase in finished tiles from 25 m2/day to 300 m2/day and would satisfy the existing market demand. Thus it will be possible to create new jobs. - To increase over 25 % the material utilization in the cutting process. The research, directed to obtain an automated line for the production of flooring slate tiles, should be approached as follows : Raw material study. An analysis of the physical qualities of the stone will determine the characteristics of the cutting diamond and the calibration process. Design and building of the prototype considering: a new cutting process for slate flo tiles, with a precision of 0,3 mm, a machine to even out the block edges after cutting calibrating machine to even the bottom side to give a surface parallel to the top after exfolia rectification of up to 3 mm and three calibration heads will be required, a washing tunnel, drying tunnels (after washing and waxing respectively), a waxing tunnel including an ana of wax behaviour to optimize the process. Some transport methods between one stage an next.

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.

Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

Données non disponibles

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

CRS - Cooperative research contracts

Coordinateur

Pizarras Villar del Rey
Contribution de l’UE
Aucune donnée
Adresse
S/N,Finca el Bodonal
06192 Villar del Rey - Badojoz
Espagne

Voir sur la carte

Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée

Participants (6)

Mon livret 0 0