Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2024-06-12

Innovative complete production line for the manufacturing of slate flooring tiles

Obiettivo



The growth potential of the slate sector would be enhanced by the introduction of automated productions. Thus, the aim of this project is to design a prototype of an automated line for the production of flooring slate tiles. The main objectives can be summarized as follow : - To create new slate products (flooring tiles, platforms, steps etc.) with similar finish than other ornamental rocks as marble and granite, but with different properties : slate plaquettes with four bevelling edges and of a very uniform thikness (up to 0,5 mm variations). Therefore, new products of high quality will be introduced in the construction sector. - To automate the production of slate flooring tiles, that would involve an increase in finished tiles from 25 m2/day to 300 m2/day and would satisfy the existing market demand. Thus it will be possible to create new jobs. - To increase over 25 % the material utilization in the cutting process. The research, directed to obtain an automated line for the production of flooring slate tiles, should be approached as follows : Raw material study. An analysis of the physical qualities of the stone will determine the characteristics of the cutting diamond and the calibration process. Design and building of the prototype considering: a new cutting process for slate flo tiles, with a precision of 0,3 mm, a machine to even out the block edges after cutting calibrating machine to even the bottom side to give a surface parallel to the top after exfolia rectification of up to 3 mm and three calibration heads will be required, a washing tunnel, drying tunnels (after washing and waxing respectively), a waxing tunnel including an ana of wax behaviour to optimize the process. Some transport methods between one stage an next.

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.

Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Programma(i)

Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

Dati non disponibili

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

CRS - Cooperative research contracts

Coordinatore

Pizarras Villar del Rey
Contributo UE
Nessun dato
Indirizzo
S/N,Finca el Bodonal
06192 Villar del Rey - Badojoz
Spagna

Mostra sulla mappa

Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato

Partecipanti (6)

Il mio fascicolo 0 0