Objectif
The investigations of the project have been enabled by the set up of a grinding machine demonstrator with CNC crushing device for dressing and wheel position measuring system for save dressing operations. From the practical experiments result recommendations for the choice of parameters for dressing. Mainly, these have an effect on the initial grinding wheel wear. In the course of the project, vitrified bonded grinding wheels have been developed that can be used advantageously at high cutting speeds. By an increased cutting speed the work piece roughness has been reduced significantly and the wheel wear has been improved. In the field of roughing, the electroplated bonding has shown its superiority over the vitrified and the resinoid bond.
In a qualitative comparison a higher material removal rate has been enabled and a much smaller wear has been observed. Furthermore, it has been shown that the measurement of force components and acoustic emission signals can be used for control and monitoring of the dressing and grinding processes.
Planned investigations on the improvement of the grinding process by the adaptation of the coolant supply have not been carried out in favour of a more extensive comparison of the grinding wheels. Motivated by a noticed cobalt uptake in the coolant, a study has been carried out to find out the influences of additives on the leaching of cobalt by neat oil coolants. Mainly used additives have been classified into good and bad compatibility with cobalt.
The primary objective of this project is to reduce the cycle time for grinding of near net shape forming tools that consist of hard alloy metall. At the same time the high technological demands concerning the surface finish and the surface integrity must be fulfilled. This will be achieved by use of an advanced CNC high-speed grinding process with specially adapted diamondform grinding wheels. The grinding wheels will be developed and designed according to the grinding process requirements. Additionally, a new form crushing tool suitable for grinding toolform dressing operation within the grinding machine will be investigated and optimised for industrial application. The secondary objective concerns environmental and health aspects, which must be considered in detail in the near future during the designing phase of high speed grinding processes, because of stronger legal requirements. The optimization of the grinding fluid supply is one of the most important topics in the field of ecological and health aspects. This optimization concerns the design and positioning of the nozzle, the pressure and the flowrate of the grinding fluid as well as the composition of the grinding fluid ingredients (base fluid + additives). The criteria for optimization are on the one hand the reduction of the fluid flowrate which means less pollution and less costs for procuring, maintaining/cleaning and disposal of the grinding fluid and on the other hand the improvement of the technological results concerning surface finish and integrity of the workpiece as well as grinding tool wear.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles sciences chimiques chimie inorganique métal de transition
- sciences naturelles sciences de la Terre et sciences connexes de l'environnement sciences de l'environnement pollution
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
35745 Herborn
Allemagne
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.