Objectif
Colour Sheet Fed Printing is a way of life for thousands of printers within the European Community. When the industry suppliers, training sectors and peripheral industries (pre-press, advertising, paper and inks, etc.) are taken into account, the industrial sector accounts for a minimum of 8,000 companies and at least 400,000 jobs. This industry is under great pressure to produce a higher percentage of good-quality work (reduce waste), diminish make-ready (setting up new print jobs), and increase overall productivity (reduce down-time).
At the same time, the technology is rapidly evolving and the need is increasingly for employees who "understand printing" and not just for those who know how to run the machines. This implies giving printers a better understanding of the functional dependencies of the printing process. In particular it means putting an emphasis on quality control and problem detection and correction: showing the trainees what can go wrong and how to work back from problems on the process output (the printed sheet) to the potential problems on the press.
The SHOTS project proposes to build a dynamic training simulator that would do for sheet fed printing machines what a flight simulator does for aircraft.
The simulator that was built models the offset process as it applied to sheetfed printing. This is the largest segment of the printing industry with over 80 000 companies involved in this sector in Europe alone. This industry represents well over 1 000 000 jobs in the European Union.
While the simulator represents the short-term results, the real long-term benefit from this project is the underlying model of the process. It can be applied to process control for the offset sector as well as serving as a base for similar models for other sectors of the printing industry. As the industry evolves, the underlying model can be used to keep the simulators updated so that existing personnel can adapt to the new technology and new personnel can learn how to operate the process. The underlying model is a generic one - serving the interests of the group of SMEs in the project, and not reflecting any one supplier's technology,
It would let the trainee "run" the press, and would show him/her what the output print copy would look like for any given machine state. Rather than memorise a predefined set of output print copies, the simulator will calculate what the copy should look like any time the trainee wants to "pull" a copy. The simulator would be accompanied by an "Exercise Generator" that would let the trainers set up sequences of problems that the trainee must recognise, analyse and correct.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie ingénierie des materiaux couleurs
- ingénierie et technologie génie mécanique génie automobile génie aérospatial avion
- sciences sociales économie et affaires économie économie de la production productivité
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Données non disponibles
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
91893 Orsay
France
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.