Obiettivo
Colour Sheet Fed Printing is a way of life for thousands of printers within the European Community. When the industry suppliers, training sectors and peripheral industries (pre-press, advertising, paper and inks, etc.) are taken into account, the industrial sector accounts for a minimum of 8,000 companies and at least 400,000 jobs. This industry is under great pressure to produce a higher percentage of good-quality work (reduce waste), diminish make-ready (setting up new print jobs), and increase overall productivity (reduce down-time).
At the same time, the technology is rapidly evolving and the need is increasingly for employees who "understand printing" and not just for those who know how to run the machines. This implies giving printers a better understanding of the functional dependencies of the printing process. In particular it means putting an emphasis on quality control and problem detection and correction: showing the trainees what can go wrong and how to work back from problems on the process output (the printed sheet) to the potential problems on the press.
The SHOTS project proposes to build a dynamic training simulator that would do for sheet fed printing machines what a flight simulator does for aircraft.
The simulator that was built models the offset process as it applied to sheetfed printing. This is the largest segment of the printing industry with over 80 000 companies involved in this sector in Europe alone. This industry represents well over 1 000 000 jobs in the European Union.
While the simulator represents the short-term results, the real long-term benefit from this project is the underlying model of the process. It can be applied to process control for the offset sector as well as serving as a base for similar models for other sectors of the printing industry. As the industry evolves, the underlying model can be used to keep the simulators updated so that existing personnel can adapt to the new technology and new personnel can learn how to operate the process. The underlying model is a generic one - serving the interests of the group of SMEs in the project, and not reflecting any one supplier's technology,
It would let the trainee "run" the press, and would show him/her what the output print copy would look like for any given machine state. Rather than memorise a predefined set of output print copies, the simulator will calculate what the copy should look like any time the trainee wants to "pull" a copy. The simulator would be accompanied by an "Exercise Generator" that would let the trainers set up sequences of problems that the trainee must recognise, analyse and correct.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria dei materiali colori
- ingegneria e tecnologia ingegneria meccanica ingegneria dei veicoli ingegneria aerospaziale aeromobili
- scienze sociali economia e commercio scienze economiche economia della produzione produttività
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
91893 Orsay
Francia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.