Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2022-12-27

HEAT PIPE SYSTEM ON MILK SPRAY DRYERS

Objetivo

The purpose of the project is to demonstrate the use of a heat pipe heat recovery system to recover heat from a milk dryer exhaust. The recovered heat is used to pre-heat the incoming supply air to the dryer, with consequent energy savings.
The heat recovery system is designed to recover approx. 920 KW, at dryer rated output of 3 Tonnes/hr. Based on dryer running time of 4,500 hours/year, this is equivalent to an annual saving of 430 TOE/yr. A payback period of approx. 7 years is expected.
The unit actually exceeded the design heat recovery of 20-22 %. But the unit itself was frought with cleaning problems. Milk Powder is a very sticky substance and as such it caused a lot of fouling on the unit, both on the Q dot pipes and on the ducts. Due to the construction of the unit, C.I.P. solutions containig detergents could not be used due to corrosion problems. This increased the cleaning problems. A number of efforts were made in the intervening years to improve the cleaning, e.g. in excess of L10,000 was spent in 1984, in installing flaps on the inlet duct work. Even after this spend, the unit still was not properly cleanable. The unit itself after six years of operations, was also getting into bad repair due to its very exposed position on top of the drying plant roof.
Based on the above information, a decision was taken to remove the unit due to its unhygienic state and the associated risks of having an unhygienic piece of plant in a food factory.
The exhaust air stack of a large spray dryer has been fitted with a low pressure drop, washable, aluminium, Q-DOT heat pipe heat exchanger. This heat exchanger transfers heat from the hot contaminated exhaust air to the cool clean supply air. The pre-heated supply air is then routed to the oil fired air heater before being fed to the dryer chamber. The result of pre-heating the air is a reduction in the fuel consumed by the air heater to maintain the air at the specified drying temperature.

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Este proyecto aún no se ha clasificado con EuroSciVoc.
Sugiera los ámbitos científicos que considere más relevantes y ayúdenos a mejorar nuestro servicio de clasificación.

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

Datos no disponibles

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

DEM - Demonstration contracts

Coordinador

CARBERY MILK PRODUCTS LTD
Aportación de la UE
Sin datos
Dirección
BALLINEEN
CO Cork
Irlanda

Ver en el mapa

Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos
Mi folleto 0 0