Objectif
To verify on an industrial scale the technical and economic validity of introducing coke scraps of differing granulometry into the comburant air zone of continuously operating hot blast cupolas, thereby utilizing a product (coke breeze) of high heat and energy content which would be otherwise degraded as a difficult to use, low cost by-product. Scraps recovery of +- 1,400 T/y. will yield a net saving of +- Lit. 170 million. Payback is estimated at 2.2 years.
The project began in December 1982 and work was halted in April 1985. The melting system is considered the heart of the foundry. It supplies liquid metal for the casting line in quality and quantity required. For this reason it has to be technically reliable and economically profitable. Problems arose with the demonstration plant, particularly with clogging and erosion of piping, inconsistency of the coke breeze dose, maintenance difficulties and the gravity feed: consequently the contractor decided it was prudent to abandon the project. It did however yield the following results:
- the efficiency of the coke breeze, blown-in from the tuyeres exceeded 90%;
- pressure inside the cupola is not influenced by the blowing-in of the coke breeze;
- for the introduction of the coke breeze up to +- 500 kg/h, the melting area inside the cupola does not change place;
- working of the cupola does not undergo variations, in fact there appears to be a tendency to work without oxidation (insufficient data makes it impossible to be more exact on this point);
-coke analysis is prefectly controlled;
- maximum allowable humidity in the coke, for the plant to be able to work well, must not exceed 1.5%.
The plant was installed at the Teksid factory and has an annual capacity of 130,000 T of mechanical castings in grey and modular iron, melted in the cupola.
The thermal efficiency of hot blast cupola furnaces depends on a charge of best quality coke. The gauged size of the coke is essential for the regular working of the cupola: this is achieved by sieving of the coke prior to introduction to the cupola.
The demonstrative plant had the function of substituting +- 4% of the coke (90-140 mm) with recovered coke breeze unusable in the cupola owing to its size (+- 8 mm). Coke breeze is collected directly under the coke vibrating screen, then transplanted pneumatically into the silos. From these it is gravity fed into a pneumatic system which meters correct dosage prior to injection, (by coaxially placed nozzles) to the tuyeres, into the coke bed area of the cupola. The solid charge takes more than 60 min. to reach the melting area, becoming iron in the composition required. It is necessary, if the injection system for the coke breeze is used, not to charge the corresponding amount of coke in the charge slip. (In fact the coke charge would have to be increased and take at least 1 hour to reach the melting area).
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
10022 CARMAGNOLA
Italie
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.