Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2022-12-27

INSULATION AND VENTILATION OF DWELLINGS BY STANDARD BAY PANEL RETROFITTING

Objetivo

80 dwellings in existing apartment buildings in Metz (Moselle), and in Paris are internally insulated with pre-fabricated panels. Combination of helio & parieto-dynamic concepts allows a reduction of heat losses through facades, pre-heating of fresh air and improvement of ventilation. Average savings are expected to reach 0.17 TOE/dwelling/year (10% of previous consumption).
Project started in December 1986. The setting-up of the pre-fabricated panels was finished and their installation was monitored during the winter 88/89 in CERNAY (30 dwellings) and in VIEUX-CHARMONT (20 dwellings). The completion date (initially October 89) had to be postponed to mid 1991 to allow two heating periods of monitoring.
A new site (PETITE HOLLANDE) was proposed. The monitoring, limited in winter 88/89, at VIEUX-CHARMONT was unsatisfactory.
1. The traditional method of retrofitting the building envelope with external insulation is efficient but can be expensive, uneasy to work, does not prevent thermal bridges on window frames and does not solve ventilation problems.
2. The device to be demonstrated allows cancellation of heat losses due to thermal bridges and recovery of heat losses through the facade. It combines :
- an internal insulation around the window by means of a standard bay panel (185 cm x 175 cm) including a carefull treatment of thermal bridges in the window frame.
- a parieto-dynamic ventilation : the fresh air entering into the facade is pre-heated by circulating into small ducts (20 mm x 30 mm) incorporated in the panel, and then circulated into the room. 3. The panel itself is made with :
- a 70 mm-thick insulating material incorporating air ducts
- a vapour barrier
- a 13 mm-thick cardboard-plaster.
4. Various designs provide for different types of windows and incorporate when necessary a room forthe radiator. In the latter case, a reflecting foil is added behind the radiator.
5. An optional design (not included in the project) allows for an additional window. Such an alternative would reduce significantly heat losses and increase heat recovery on exhaust air.

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Este proyecto aún no se ha clasificado con EuroSciVoc.
Sugiera los ámbitos científicos que considere más relevantes y ayúdenos a mejorar nuestro servicio de clasificación.

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

Datos no disponibles

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

DEM - Demonstration contracts

Coordinador

RHINOLITH
Aportación de la UE
Sin datos
Dirección
ZONE INDUSTRIELLE
68190 UNGERSHEIM
Francia

Ver en el mapa

Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos
Mi folleto 0 0