Objectif
To demonstrate the energy and material savings possible with a novel cleaning in place system which can be retrofitted, at low cost to a range of conventional evaporators.
To demonstrate that the cleaning cycle can be reduced from 5 hours to 2.2 hours and that the steam energy required for cleaning can be reduced from
18.5 t/daily cycle to 1.0 t/daily cycle.
Final report in preparation.
Conventional evaporator cleaning methods require the same steam and power consumption as is used in evaporating milk. Cleaning times can vary from
2 to 5 hours and this has a great effect on energy consumption and plant availability. Long or ineffective cleaning cycles are compensated for by building larger plants with increased costs and energy consumption.
Any cleaning system aims to provide sufficient energy to suspend or dissolve material which is adhering to surfaces. This energy may be provided in several ways, for example: kinetic energy (brushing, turbulent flow), thermal energy (hot water temperature) and chemical energy (acids, alkali, detergents).
Evaporators in the dairy industry have traditionally relied on the last two forms i.e. thermal energy and chemical energy. Kinetic energy has played a very small part in the cleaning of falling film evaporators as the energy of the falling film is insufficient to cause turbulent flow. This is the primary reason for the extraordinary length of the cleaning cycle in milk evaporators.
This project systematically approaches the need to increase the mechanical action of the cleaning agent throughout the evaporator. The velocity of all cleaning films will be increased tenfold and additional cleaning jets will be fitted to ensure that all parts of the evaporator are clean. Process pumps will no longer provide the means of circulating the cleaning agents. Larger pumps which are to be used only during the cleaning cycle will be fitted complete with a computer controlled system of isolating valves and cleaning cycle control.
Conventional evaporators do not reuse their cleaning agents. Because of the much larger flows involved in the present solution it will be necessary to recycle chemicals and detergent. A detergent holding and cleaning system is an integral part of the economics of the project.
The usage of caustic agents is increased by hard waters. In this project it is proposed to collect the process condensate from the evaporator and to use this as the make up water for the cleaning system. In this way heat will be recycled and the usage of caustic will be minimized.
This project will demonstrate the effectiveness of a novel cleaning in place system for falling film evaporators in the dairy industry.
The total steam consumption of the wash cycle will be reduced from 18.5 t to less that 1 t.
Cleaning will be more effective and the number of washes will be reduced from 280 per annum to 230 washes per annum. This will yield further energy savings.
The recycling of hot condensate will achieve additional energy economies.
Plant availability will improve and the waste chemical load on the environment will be reduced.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
ROXBORO Limerick
Irlande
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.