Obiettivo
To demonstrate the energy and material savings possible with a novel cleaning in place system which can be retrofitted, at low cost to a range of conventional evaporators.
To demonstrate that the cleaning cycle can be reduced from 5 hours to 2.2 hours and that the steam energy required for cleaning can be reduced from
18.5 t/daily cycle to 1.0 t/daily cycle.
Final report in preparation.
Conventional evaporator cleaning methods require the same steam and power consumption as is used in evaporating milk. Cleaning times can vary from
2 to 5 hours and this has a great effect on energy consumption and plant availability. Long or ineffective cleaning cycles are compensated for by building larger plants with increased costs and energy consumption.
Any cleaning system aims to provide sufficient energy to suspend or dissolve material which is adhering to surfaces. This energy may be provided in several ways, for example: kinetic energy (brushing, turbulent flow), thermal energy (hot water temperature) and chemical energy (acids, alkali, detergents).
Evaporators in the dairy industry have traditionally relied on the last two forms i.e. thermal energy and chemical energy. Kinetic energy has played a very small part in the cleaning of falling film evaporators as the energy of the falling film is insufficient to cause turbulent flow. This is the primary reason for the extraordinary length of the cleaning cycle in milk evaporators.
This project systematically approaches the need to increase the mechanical action of the cleaning agent throughout the evaporator. The velocity of all cleaning films will be increased tenfold and additional cleaning jets will be fitted to ensure that all parts of the evaporator are clean. Process pumps will no longer provide the means of circulating the cleaning agents. Larger pumps which are to be used only during the cleaning cycle will be fitted complete with a computer controlled system of isolating valves and cleaning cycle control.
Conventional evaporators do not reuse their cleaning agents. Because of the much larger flows involved in the present solution it will be necessary to recycle chemicals and detergent. A detergent holding and cleaning system is an integral part of the economics of the project.
The usage of caustic agents is increased by hard waters. In this project it is proposed to collect the process condensate from the evaporator and to use this as the make up water for the cleaning system. In this way heat will be recycled and the usage of caustic will be minimized.
This project will demonstrate the effectiveness of a novel cleaning in place system for falling film evaporators in the dairy industry.
The total steam consumption of the wash cycle will be reduced from 18.5 t to less that 1 t.
Cleaning will be more effective and the number of washes will be reduced from 280 per annum to 230 washes per annum. This will yield further energy savings.
The recycling of hot condensate will achieve additional energy economies.
Plant availability will improve and the waste chemical load on the environment will be reduced.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
ROXBORO Limerick
Irlanda
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.