Objetivo
Application on excavators of a load sensing hydraulic system for their working implements and transmission. This system is aimed at improving the energy efficiency of excavators in neutral, cut-off and partial charge conditions. It was expected to achieve a saving of 4000 liters gasoil/yr for an excavator of 73.5 kW nominal power compared with a current production excavator.
On the basis of the test results for :
- Trenching,
- Digging from bench and loading of trucks located on the same level of the excavator,
- Digging from bench and loading of trucks located on a lower level.
The performance figures of LS adapted excavator are higher than those of a current model either for the average productivity and the usage of the machine weight or the fuel efficiency. Based on the current model reference, one has
Current model LS adapted excavator
Average productivity 100 116
Production/weight 100 126,5
Production/fuel consumption 100 113,7
Taking into account a similar productivity, the energy saving resulting from these tests is 4200 liters gasoil/year excavator for 2000 hours /year.
The overcost of the innovative hydraulic system is expected to be negligible; in any case, the rate variation on the total cost of the excavator will not be significant.
Market prospects amount to 8000 units/year in the EEC.
The energy saving for the Formula 100 excavator using the L.S. system is 12.1% of the fuel consumption compared to the model FE18 excavator, which was taken as the standard.
An excavator has been equipped with a load sensor system (LS) which controls delivery of oil to the hydraulic system by the 2 pumps of the excavator.
With the LS system, both pumps can operate independently, so only the oil pressure requested by the operator is produced.
The use of load sensors permits the optimization of the engine fuel oil consumption essentially for the following cases:
1) NEUTRAL CONDITION : engine is running but the machine neither works nor moves; both pumps are disconnected while in the conventional system they are still working.
2) CUT-OFF CONDITIONS : one or more implements cannot travel anymore or they meet an obstacle which they cannot remove; in this case, the cubic capacity of one pump is reduced at the lowest level, maintening the hydraulic circuit under pressure. The cut-off function is also available for the conventional system but is not used because the 2 pumps are connected together.
3) PARTIAL CHARGE CONDITIONS : the pumps are controlled in order to provide only the requested oil flow while in the conventional system excess oil flow induces additional fuel consumption.
The excavator of 73.5 kW equipped with the LS system has been compared in real use with a conventional excavator in order to verify its effectiveness and the energy saving target.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
Este proyecto aún no se ha clasificado con EuroSciVoc.
Sugiera los ámbitos científicos que considere más relevantes y ayúdenos a mejorar nuestro servicio de clasificación.
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
10040 Cambiano
Italia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.