Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2022-12-27

LOAD SENSING HYDRAULIC SYSTEM ON EXCAVATORS

Ziel

Application on excavators of a load sensing hydraulic system for their working implements and transmission. This system is aimed at improving the energy efficiency of excavators in neutral, cut-off and partial charge conditions. It was expected to achieve a saving of 4000 liters gasoil/yr for an excavator of 73.5 kW nominal power compared with a current production excavator.
On the basis of the test results for :
- Trenching,
- Digging from bench and loading of trucks located on the same level of the excavator,
- Digging from bench and loading of trucks located on a lower level.
The performance figures of LS adapted excavator are higher than those of a current model either for the average productivity and the usage of the machine weight or the fuel efficiency. Based on the current model reference, one has
Current model LS adapted excavator
Average productivity 100 116
Production/weight 100 126,5
Production/fuel consumption 100 113,7
Taking into account a similar productivity, the energy saving resulting from these tests is 4200 liters gasoil/year excavator for 2000 hours /year.
The overcost of the innovative hydraulic system is expected to be negligible; in any case, the rate variation on the total cost of the excavator will not be significant.
Market prospects amount to 8000 units/year in the EEC.
The energy saving for the Formula 100 excavator using the L.S. system is 12.1% of the fuel consumption compared to the model FE18 excavator, which was taken as the standard.
An excavator has been equipped with a load sensor system (LS) which controls delivery of oil to the hydraulic system by the 2 pumps of the excavator.
With the LS system, both pumps can operate independently, so only the oil pressure requested by the operator is produced.
The use of load sensors permits the optimization of the engine fuel oil consumption essentially for the following cases:
1) NEUTRAL CONDITION : engine is running but the machine neither works nor moves; both pumps are disconnected while in the conventional system they are still working.
2) CUT-OFF CONDITIONS : one or more implements cannot travel anymore or they meet an obstacle which they cannot remove; in this case, the cubic capacity of one pump is reduced at the lowest level, maintening the hydraulic circuit under pressure. The cut-off function is also available for the conventional system but is not used because the 2 pumps are connected together.
3) PARTIAL CHARGE CONDITIONS : the pumps are controlled in order to provide only the requested oil flow while in the conventional system excess oil flow induces additional fuel consumption.
The excavator of 73.5 kW equipped with the LS system has been compared in real use with a conventional excavator in order to verify its effectiveness and the energy saving target.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Dieses Projekt wurde noch nicht bei EuroSciVoc klassifiziert.
Schlagen Sie die Wissenschaftsbereiche vor, die Ihrer Einschätzung nach besonders relevant sind, und helfen Sie uns, unseren Klassifizierungsdienst zu verbessern.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

DEM - Demonstration contracts

Koordinator

Fiatallis Europe SpA
EU-Beitrag
Keine Daten
Adresse
Viale Torino
10040 Cambiano
Italien

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten
Mein Booklet 0 0