Objetivo
The project concerns the analysis of the behaviour of civil engineering steel structures, of the moment resisting category, under earthquake loads. The objective is to implement in such an analysis a quantitative reference to the failure of connections in terms of low cycle fatigue, considering the duration of the earthquake and the corresponding number of cycles supported in dissipative (plastic) zones.
The principal activities of the project are as follows:
Full size testing of beam to column connections.
Eight typologies of beam to column connections have been identified as covering a wide range of common
structural applications in steel construction and will be analyzed. Testing on welds.
The problem will be specifically addressed, both for fillet and butt welds, by testing specimens of the two joint
typologies.
Design of the reference steel frame building structure and related numerical analyses.
A two-story industrial/office building will be designed. A preliminary linear-elastic design stress-analysis will
be carried out according to Eurocode 3 (Steel structures) and Eurocode 8 (Constructions in seismic zones)
considering the eight typlologies of beam to column connections previously tested. A numerical non-linear
analysis under the effect of the earthquake will be performed considering four beam to column connections
typologies selected among the eight tested. Finally, out of the four connections experimentally investigated and
numerically examined through the non-linear analysis, one will be selected as of special interest.
Pseudo-dynamic testing of a steel frame building structure.
A one bay prototype of the frame, incorporating the selected connection, will be built and tested to evaluate the
earthquake induced behaviour of the building. The seismic action will be simulated through the pseudodynamic
technique.
Shaking table testing of a steel frame building structure.
In this work task the seismic action will be simulated through the shaking table technique that enables to apply
to the specimen the real seismic dynamic loads both in terms of amplitude, frequency content and their
distribution on the structure (distributed inertial loads instead of concentrated forces used in the pseudodynamic
technique), providing additional complementary data with respect to the pseudodynamic methodology.
Interpretation of experimental results, comparison between experimental and numerical results and updating of
numerical analyses.
The comparison between numerical and experimental results will provide terms to revise the numerical
modelling, both linear and non-linear, and an updating of the numerical analyses will be performed.
The main deliverables of this research project are: definition of practical rules for the design of the connections
studied in the research. This includes welding specification in relation with the number of plastic fatigue cycles
expected, which are a characteristic of the region where a structure is to be built; identification of evidences
to support or modify the q factors presently proposed in Eurocode 8. The research results, especially those in
terms of fatigue curves, will be used to make the difference between the design of a structure in a region where
only small duration earthquakes, bringing few fatigue cycles, can be expected and the design of a similar
structure in another region where long duration earthquakes, involving many fatigue cycles, are a reality.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería civil
- ciencias naturales ciencias de la tierra y ciencias ambientales conexas geología sismología
- ciencias naturales matemáticas matemáticas aplicadas análisis numérico
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
24068 Seriate
Italia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.