Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2024-05-07

Improved assessment of steel buildings performance during earthquakes.

Ziel

The project concerns the analysis of the behaviour of civil engineering steel structures, of the moment resisting category, under earthquake loads. The objective is to implement in such an analysis a quantitative reference to the failure of connections in terms of low cycle fatigue, considering the duration of the earthquake and the corresponding number of cycles supported in dissipative (plastic) zones.

The principal activities of the project are as follows:
Full size testing of beam to column connections.
Eight typologies of beam to column connections have been identified as covering a wide range of common
structural applications in steel construction and will be analyzed. Testing on welds.
The problem will be specifically addressed, both for fillet and butt welds, by testing specimens of the two joint
typologies.
Design of the reference steel frame building structure and related numerical analyses.
A two-story industrial/office building will be designed. A preliminary linear-elastic design stress-analysis will
be carried out according to Eurocode 3 (Steel structures) and Eurocode 8 (Constructions in seismic zones)
considering the eight typlologies of beam to column connections previously tested. A numerical non-linear
analysis under the effect of the earthquake will be performed considering four beam to column connections
typologies selected among the eight tested. Finally, out of the four connections experimentally investigated and
numerically examined through the non-linear analysis, one will be selected as of special interest.
Pseudo-dynamic testing of a steel frame building structure.
A one bay prototype of the frame, incorporating the selected connection, will be built and tested to evaluate the
earthquake induced behaviour of the building. The seismic action will be simulated through the pseudodynamic
technique.
Shaking table testing of a steel frame building structure.
In this work task the seismic action will be simulated through the shaking table technique that enables to apply
to the specimen the real seismic dynamic loads both in terms of amplitude, frequency content and their
distribution on the structure (distributed inertial loads instead of concentrated forces used in the pseudodynamic
technique), providing additional complementary data with respect to the pseudodynamic methodology.
Interpretation of experimental results, comparison between experimental and numerical results and updating of
numerical analyses.
The comparison between numerical and experimental results will provide terms to revise the numerical
modelling, both linear and non-linear, and an updating of the numerical analyses will be performed.
The main deliverables of this research project are: definition of practical rules for the design of the connections
studied in the research. This includes welding specification in relation with the number of plastic fatigue cycles
expected, which are a characteristic of the region where a structure is to be built; identification of evidences
to support or modify the q factors presently proposed in Eurocode 8. The research results, especially those in
terms of fatigue curves, will be used to make the difference between the design of a structure in a region where
only small duration earthquakes, bringing few fatigue cycles, can be expected and the design of a similar
structure in another region where long duration earthquakes, involving many fatigue cycles, are a reality.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

CSC - Cost-sharing contracts

Koordinator

Enel.Hydro SpA
EU-Beitrag
Keine Daten
Adresse
Via Pastrengo
24068 Seriate
Italien

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten

Beteiligte (4)

Mein Booklet 0 0