Objetivo
The proposed project aims to develop an innovative approach to the production of low- cost, complex-shaped engineering components. Industrial sectors, particularly automotive, are continually seeking to reduce manufacturing costs. A preferred route that minimises wastage of raw materials is the near-net shaping, powder metallurgy process. However, PM is incapable of producing complex shapes unless the parts are machined after sintering. This is always expensive due to the hardness of the heat-treated materials demanding careful machining procedures. The proposed research aims to develop effective techniques for machining powder compacts before sintering. This will require novel approaches to powder pressing, clamping, machining procedures, tooling and lubrication but success will be rewarded by significant savings in time, materials, tools and, therefore, cost.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véase: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véase: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- ingeniería y tecnologíaingeniería mecánicatribologíalubricación
- ingeniería y tecnologíaingeniería mecánicaingeniería de fabricaciónfabricación sustractiva
- ingeniería y tecnologíaingeniería de materialesmetalurgia
Para utilizar esta función, debe iniciar sesión o registrarse
Le pedimos disculpas, pero se ha producido un error inesperado durante la ejecución.
Necesita estar autentificado. Puede que su sesión haya finalizado.
Gracias por su comentario. En breve recibirá un correo electrónico para confirmar el envío. Si ha seleccionado que se le notifique sobre el estado del informe, también se le contactará cuando el estado del informe cambie.
Convocatoria de propuestas
Datos no disponiblesRégimen de financiación
CSC -Coordinador
3001 HEVERLEE
Bélgica