Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2024-05-15

New approach to the manufacture of complex shaped parts

Obiettivo

The proposed project aims to develop an innovative approach to the production of low- cost, complex-shaped engineering components. Industrial sectors, particularly automotive, are continually seeking to reduce manufacturing costs. A preferred route that minimises wastage of raw materials is the near-net shaping, powder metallurgy process. However, PM is incapable of producing complex shapes unless the parts are machined after sintering. This is always expensive due to the hardness of the heat-treated materials demanding careful machining procedures. The proposed research aims to develop effective techniques for machining powder compacts before sintering. This will require novel approaches to powder pressing, clamping, machining procedures, tooling and lubrication but success will be rewarded by significant savings in time, materials, tools and, therefore, cost.

Campo scientifico (EuroSciVoc)

Programma(i)

Argomento(i)

Invito a presentare proposte

Dati non disponibili

Meccanismo di finanziamento

CSC - Cost-sharing contracts

Coordinatore

KATHOLIEKE UNIVERSITEIT LEUVEN
Contributo UE
Nessun dato
Indirizzo
2,Kasteelpartk Arenberg, 44
3001 HEVERLEE
Belgio
Costo totale
Nessun dato

Partecipanti (11)