Objectif
The aim of the project is to realise the re-casing of a corroded well with a sleeve of a sole length upper than 1000 m and made of composite materials polymerised in-situ.
The particularity of the project consists in postponing the sleeve polymerisation after having introduced it in the ground face to the re-casing area.
This puts advantages in :
- using big length tubes wound on a reel
- possibility of re-casing a well with a tube which outside diameter is close to the internal diameter of the well to be treated.
Applied to a geothermal well, this re-casing allow :
- to save a corroded tube,
- to decrease the losses of charge and so to decrease the exploitation costs compared to a basic re-casing solution.
Considerable progress was made on a project which had enromous potential before it had to be stopped. Many technical advances were made towards putting an innovative product onto the market. A significant R&D effort is necessary to eliminate some technical difficulties which were not revealed during the previous R&D phases.
The DRILLFLEX process consists in using a tubing made of composite materials, soft and unpolymerised at room temperature, made in big length and having reduced dimensions because of a cross folding. After running-in in the well and rounded-out by inflation, the Drillflex sleeve is polymerised which gives it its final mechanical characteristics.
The programme has six phases :
1. ENGINEERING AND CONCEPTION
Specific studies and tests are necessary to adapt the acquired Drillflex technology to the realisation in big length. Studies will be done on the product measures, on its mechanical behaviour when polymerised and unpolymerised, and on the waterlightness of high and low parts.
Tests will be done on tubing of 6 to 100 meters long.
Getting old tests will be done to evaluate the time of life of the product in a geothermal environment. 2. Production will consist in manufacturing a Drillflex tubing of 2000 meters long. Several tubes of 6 to 100 meters long will allow to carry out the test of characteristics.
A 1000 meters tubing will be done in one length to be re-casing in the geothermal well.
3. SITE-PREPARATION will consist in gauging the well and in cleaning the sediments. To repair the working area a cap will be set at the end of the well.
4. IMPLEMENTATION of the Drillflex sleeve in site is decomposed in 9 phases :
- running of the Drillflex tube in the well grace to the reel,
- inflation of the tube by a fluid injection
- rising of temperature,
- polymerisation,
- drilling of the lower part,
- manufacture of the upper clamp,
- take off the cap bottom,
- control
5. COMMISSIONING will consist in putting a doublet, verifying the waterlightness and measuring the loss of charge.
6. Measures and tests will be realised in a period of 2 seasons of heating. Sensors will be positioned to controlled the product behaviour.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
35230 CHATILLON-SUR-SEICHE
France
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.