Objetivo
Realization of a new line for the production of crockery in porcelain characterized by a low energy consumption (thermal and electric), by an elevated production, by the elimination of intermediate stocks of semifinished products, by the reduction of working time by the elimination of the environmental impact.L%
The project's technical success is good, on the whole, both for production returns (quality and quantity wise) and in so far technical performance of the whole production line and of each machine is concerned. In particular, by comparing initial estimates, the following can be highlighted:
- Thermal energy consumption: average thermal energy consumption evidenced was equivalent to approximately 1,367 kcal/Kg of fired product over 1,350 estimated in plans. Therefore, the result is excellent.
- Electricity consumption: average consumption was 0,056 kWh/Kg per fired product, over fired 0.051 kWh/Kg estimated.
Increase in consumption, equivalent to approximately 10% is entirely satisfactory it is the result of output in a machine which is not quite under steady conditions yet and which has to deal with frequently changing product shapes, with subsequent production losses and therefore higher specific consumption.
- Line productivity: current line productivity is approximately 7 tons per day. This value is 30% lower than estimated during planning. This is explained by a production mix which is still too variable and which inevitably leads to production losses at each mould change.
This situation, which is connected to marketing factors, should soon be stabilized and allow reaching estimated production capacity.
- Productivity for worker: this is higher than estimated. In fact, the whole production line works with 5 people. Obviously not included are service staff, employees and warehousment.
- Impact on the environment: excellent results were obtained in this sector. In fact the microclimate in the plant is extremely good. Noise level is low, in fact lower than limits provided for by law. Powders dispersion is practically non existant. Impact on the environment outside the plant:
- no dust emission;
- atmospheric emission (smoke etc) within limits provided for by the law. Important changes were not made to the plant, generally, and none were made to machines individually.
The novelty consists in the design and realization of a system that foresees the use of components and technology already known and applicated in other sectors.
The new process foresees the following phases :
dry pressing of atomized powders-finishing-rapid drying-automatic spray glazing-single firing.
The traditional cycle foresees : plastic forming-drying of the semifinished products-finishing-final drying-first firing-glazing-second firing.
Therefore, there is an elimination of the drying of the semifinished products while the final drying is needed to eliminate about 4-5% of water (compared to the 12-14% of the traditional cycle) from the semifinished products what's more, the first firing will also be eliminated.
Other than the obvious energy saving, there will be a remarkable reduction of cycle time (passing from 18-36 hours to 2 hours) with a growing flexibility of the productive system.
Another process peculiarity of the new process, compared to the traditional process isrepresented by the lack of charge stocks of semifinished products as a consequence of the linkage of a production phase of a productive phase with the following.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
Este proyecto aún no se ha clasificado con EuroSciVoc.
Sugiera los ámbitos científicos que considere más relevantes y ayúdenos a mejorar nuestro servicio de clasificación.
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
01033 Civita Castellana Viterbo
Italia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.