Ziel
Realization of a new line for the production of crockery in porcelain characterized by a low energy consumption (thermal and electric), by an elevated production, by the elimination of intermediate stocks of semifinished products, by the reduction of working time by the elimination of the environmental impact.L%
The project's technical success is good, on the whole, both for production returns (quality and quantity wise) and in so far technical performance of the whole production line and of each machine is concerned. In particular, by comparing initial estimates, the following can be highlighted:
- Thermal energy consumption: average thermal energy consumption evidenced was equivalent to approximately 1,367 kcal/Kg of fired product over 1,350 estimated in plans. Therefore, the result is excellent.
- Electricity consumption: average consumption was 0,056 kWh/Kg per fired product, over fired 0.051 kWh/Kg estimated.
Increase in consumption, equivalent to approximately 10% is entirely satisfactory it is the result of output in a machine which is not quite under steady conditions yet and which has to deal with frequently changing product shapes, with subsequent production losses and therefore higher specific consumption.
- Line productivity: current line productivity is approximately 7 tons per day. This value is 30% lower than estimated during planning. This is explained by a production mix which is still too variable and which inevitably leads to production losses at each mould change.
This situation, which is connected to marketing factors, should soon be stabilized and allow reaching estimated production capacity.
- Productivity for worker: this is higher than estimated. In fact, the whole production line works with 5 people. Obviously not included are service staff, employees and warehousment.
- Impact on the environment: excellent results were obtained in this sector. In fact the microclimate in the plant is extremely good. Noise level is low, in fact lower than limits provided for by law. Powders dispersion is practically non existant. Impact on the environment outside the plant:
- no dust emission;
- atmospheric emission (smoke etc) within limits provided for by the law. Important changes were not made to the plant, generally, and none were made to machines individually.
The novelty consists in the design and realization of a system that foresees the use of components and technology already known and applicated in other sectors.
The new process foresees the following phases :
dry pressing of atomized powders-finishing-rapid drying-automatic spray glazing-single firing.
The traditional cycle foresees : plastic forming-drying of the semifinished products-finishing-final drying-first firing-glazing-second firing.
Therefore, there is an elimination of the drying of the semifinished products while the final drying is needed to eliminate about 4-5% of water (compared to the 12-14% of the traditional cycle) from the semifinished products what's more, the first firing will also be eliminated.
Other than the obvious energy saving, there will be a remarkable reduction of cycle time (passing from 18-36 hours to 2 hours) with a growing flexibility of the productive system.
Another process peculiarity of the new process, compared to the traditional process isrepresented by the lack of charge stocks of semifinished products as a consequence of the linkage of a production phase of a productive phase with the following.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
Dieses Projekt wurde noch nicht bei EuroSciVoc klassifiziert.
Schlagen Sie die Wissenschaftsbereiche vor, die Ihrer Einschätzung nach besonders relevant sind, und helfen Sie uns, unseren Klassifizierungsdienst zu verbessern.
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
01033 Civita Castellana Viterbo
Italien
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.