Objetivo
The project was concerned with standardising the production methods for granulated tyres (by retreading) and enhancing the production methods for the granules. The granules are of non-specified material and are approximately 1mm in size. New Industries Ltd had developed the core methods and equipment for embedding granules into retread tyres to improve the tyre's road resistance, decrease road wear (in comparison with studded tyres) and promote general recycling of tyres. Further development of this Project involved diverse expertise such as adhesive materials, various granule types, coating methods, design of new production equipment and automation. This process of granulating tyres has been patented.
Several tests have been conducted on the concept to verify the characteristics of granulated tyres. At VTI in Sweden, slipping characteristics on wet ice were tested against those of studded tyres and produced very favourable results. Road wear tests performed in Germany showed that granulated tyres wear the road 14 times less than an average of nine different studded tyres. In Iceland noise from granulated tyres was compared with noise from studded tyres and regular tyres, where it was verified that noise levels from a car driving on granulated tyres are similar to those from regular tyres but significantly less than the noise levels from a car driving on studded tyres. In addition to the above tests, extensive user tests have been going on since the beginning of test production in 1994.
Partners in this project with New Industries were Vacu-lug Traction Tyres of England. They manufacture retread truck tyres and almost any tyres for non-commercial vehicles and applications ranging from small fork-lift tyres to large earth-mover tyres. They intended to use the technique for their own production of hot cure tyres as well as promoting it to manufacturers of retread passenger tyres.
The project covered two winters and focused on fully documented user and laboratory tests on the manufactured tyres. Test production was done both at Vacu-lug facilities and in Iceland with the user tests in Iceland and Scandinavia in co-operation with dealers selling Vacu-lug products. Manufacturers of retread machines were approached regarding participation in the implementation phase of the project.
The outcome of the project gave extensive knowledge of the combination of adhesives, granules and coating methods to give the best result from both the consumer and manufacturing point of view. The implementation of the technique to commercial manufacturing involves the design and full automation of the embedding process. During the project a fully automated prototype of a granulating machine with all specifications for further manufacturing will be installed and made ready for commercial manufacturing of granulated tyres.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería ambiental gestión de residuos procesos de tratamiento de residuos reciclaje
- ciencias sociales sociología relaciones laborales automatización
- ingeniería y tecnología ingeniería de materiales recubrimiento y películas
Para utilizar esta función, debe iniciar sesión o registrarse
Palabras clave
Palabras clave del proyecto indicadas por el coordinador del proyecto. No confundir con la taxonomía EuroSciVoc (Ámbito científico).
Palabras clave del proyecto indicadas por el coordinador del proyecto. No confundir con la taxonomía EuroSciVoc (Ámbito científico).
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
105 REYKJAVIK
Islandia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.