Obiettivo
The project was concerned with standardising the production methods for granulated tyres (by retreading) and enhancing the production methods for the granules. The granules are of non-specified material and are approximately 1mm in size. New Industries Ltd had developed the core methods and equipment for embedding granules into retread tyres to improve the tyre's road resistance, decrease road wear (in comparison with studded tyres) and promote general recycling of tyres. Further development of this Project involved diverse expertise such as adhesive materials, various granule types, coating methods, design of new production equipment and automation. This process of granulating tyres has been patented.
Several tests have been conducted on the concept to verify the characteristics of granulated tyres. At VTI in Sweden, slipping characteristics on wet ice were tested against those of studded tyres and produced very favourable results. Road wear tests performed in Germany showed that granulated tyres wear the road 14 times less than an average of nine different studded tyres. In Iceland noise from granulated tyres was compared with noise from studded tyres and regular tyres, where it was verified that noise levels from a car driving on granulated tyres are similar to those from regular tyres but significantly less than the noise levels from a car driving on studded tyres. In addition to the above tests, extensive user tests have been going on since the beginning of test production in 1994.
Partners in this project with New Industries were Vacu-lug Traction Tyres of England. They manufacture retread truck tyres and almost any tyres for non-commercial vehicles and applications ranging from small fork-lift tyres to large earth-mover tyres. They intended to use the technique for their own production of hot cure tyres as well as promoting it to manufacturers of retread passenger tyres.
The project covered two winters and focused on fully documented user and laboratory tests on the manufactured tyres. Test production was done both at Vacu-lug facilities and in Iceland with the user tests in Iceland and Scandinavia in co-operation with dealers selling Vacu-lug products. Manufacturers of retread machines were approached regarding participation in the implementation phase of the project.
The outcome of the project gave extensive knowledge of the combination of adhesives, granules and coating methods to give the best result from both the consumer and manufacturing point of view. The implementation of the technique to commercial manufacturing involves the design and full automation of the embedding process. During the project a fully automated prototype of a granulating machine with all specifications for further manufacturing will be installed and made ready for commercial manufacturing of granulated tyres.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria ambientale gestione dei rifiuti processi di trattamento dei rifiuti riciclaggio
- scienze sociali sociologia relazioni industriali automazione
- ingegneria e tecnologia ingegneria dei materiali rivestimenti e pellicole
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Parole chiave
Parole chiave del progetto, indicate dal coordinatore del progetto. Da non confondere con la tassonomia EuroSciVoc (campo scientifico).
Parole chiave del progetto, indicate dal coordinatore del progetto. Da non confondere con la tassonomia EuroSciVoc (campo scientifico).
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
105 REYKJAVIK
Islanda
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.