Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-05-27

Fault Injection for TTA

Objetivo

The novel time-triggered architecture (TTA) is gaining growing acceptance in industry as a generic architecture for highly dependable hard real-time systems. It is therefore important for industry and society in general that the design decisions that are at the core of this architecture are validated by all possible means. It is the objective of the project to validate experimentally the system concepts of the TTA, taking a prototype TTP/C controller chip, developed within the ESPRIT project TTA, as the basis. The experiments determine the error-detection coverage of the TTA in a realistic application by using different hardware and software based fault-injection methods.

Work description:
FIT uses all applicable hardware and software based fault-injection methods to locate weaknesses in TTA and to search for and evaluate design alternatives to correct these weaknesses. VHDL and C-Sim simulation models, pin level, heavy-ion and software implemented fault-injection techniques will be applied.

It is planned that the two-year project will be partitioned into four phases of six months each.

In phase I the hypotheses to be tested will be defined. Fault-injection experiments for the different injection methods will be specified. The hardware/software set-up of the experiments will be described.
In phase II hardware and software for the individual experiments will be set-up for a typical hard-real-time application, consisting of a TTA cluster with a node-under-test and a golden node.
In phase III a first set of fault-injection experiments will be carried out. At the end of phase III results from the different injection experiments will be analysed individually and jointly to merge and globally interpret the results of all experiments. Based on this analysis the experiments for phase IV will be defined.
In phase IV a second round of injection experiments will be carried out. At the end of this phase results will be analysed and interpreted and possible improvements in the fault-tolerance mechanisms of the TTA will be considered.

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

Datos no disponibles

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

CSC - Cost-sharing contracts

Coordinador

TECHNIKUM KAERNTEN - VEREIN ZUR ERRICHTUNG DER FACHHOCHSCHULE KAERNTEN
Aportación de la UE
Sin datos
Dirección
VILLACHERSTRASSE 1
9800 SPITTAL AN DER DRAU
Austria

Ver en el mapa

Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos

Participantes (7)

Mi folleto 0 0