Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-05-27

Fault Injection for TTA

Objectif

The novel time-triggered architecture (TTA) is gaining growing acceptance in industry as a generic architecture for highly dependable hard real-time systems. It is therefore important for industry and society in general that the design decisions that are at the core of this architecture are validated by all possible means. It is the objective of the project to validate experimentally the system concepts of the TTA, taking a prototype TTP/C controller chip, developed within the ESPRIT project TTA, as the basis. The experiments determine the error-detection coverage of the TTA in a realistic application by using different hardware and software based fault-injection methods.

Work description:
FIT uses all applicable hardware and software based fault-injection methods to locate weaknesses in TTA and to search for and evaluate design alternatives to correct these weaknesses. VHDL and C-Sim simulation models, pin level, heavy-ion and software implemented fault-injection techniques will be applied.

It is planned that the two-year project will be partitioned into four phases of six months each.

In phase I the hypotheses to be tested will be defined. Fault-injection experiments for the different injection methods will be specified. The hardware/software set-up of the experiments will be described.
In phase II hardware and software for the individual experiments will be set-up for a typical hard-real-time application, consisting of a TTA cluster with a node-under-test and a golden node.
In phase III a first set of fault-injection experiments will be carried out. At the end of phase III results from the different injection experiments will be analysed individually and jointly to merge and globally interpret the results of all experiments. Based on this analysis the experiments for phase IV will be defined.
In phase IV a second round of injection experiments will be carried out. At the end of this phase results will be analysed and interpreted and possible improvements in the fault-tolerance mechanisms of the TTA will be considered.

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

Données non disponibles

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

CSC - Cost-sharing contracts

Coordinateur

TECHNIKUM KAERNTEN - VEREIN ZUR ERRICHTUNG DER FACHHOCHSCHULE KAERNTEN
Contribution de l’UE
Aucune donnée
Adresse
VILLACHERSTRASSE 1
9800 SPITTAL AN DER DRAU
Autriche

Voir sur la carte

Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée

Participants (7)

Mon livret 0 0