Objetivo
This project will develop a multi-sensory, distributed virtual environment for the prototyping of products. The system will explore and support capabilities that are taken for granted with physical prototypes, but missing in current simulations: natural two-handed manipulation, accurate real-time constraint modelling, and the ability to touch and manipulate objects using haptic feedback. A novel combination of local and distributed processing will be used to meet stringent real-time constraints, while permitting geographically distributed users to interact with a shared model. Assessment and demonstration will be by developing four modular applications: assembly, maintenance, electronic handbook and interactive assistance. These applications support the product life cycle by allowing manufacturing and subsequent usability and maintenance issues to be considered. They are targeted at the aerospace and automotive sectors, but will be important in any industries involved in product design, where assembly, maintenance and customer support - that is, life cycle issues - must be considered during design.
Objectives:
The objective of the project is to generate a virtual environment that integrates multi-sensory interaction (visual, audio and touch senses), real-world simulation utilities, such as collision detection, gravitational force, and flexible elements and a distributed environment that will allow multiple users, in the same or different locations, to work concurrently with the same virtual model. This environment will be used by different teams, such as design, assembly, maintenance and post-sales teams, throughout the life cycle of a product. The final system will be a Distributed Virtual Prototyping Environment, that will allow users in the same or remote locations to create and analyse new products without using a physical model, mock-ups or prototypes, but by means of realistic navigation and visualisation of the virtual model, using touch sensing for shape inspection and geometry manipulation through haptic devices. A two-handed input device and four modular applications will be developed: assembly, maintenance, electronic handbook and interactive assistance.
Work description:
The aim of the project is not to develop new systems or devices from scratch, but to integrate existing ones, adding the above mentioned utilities. The final system will be a Distributed Virtual Prototyping Environment, that will allow users in the same or remote locations to analyse new products without using a physical model, by means of realistic navigation and visualisation of the virtual model, using touch sensing for shape inspection and geometry manipulation through haptic devices.
Four modular applications will be developed:
- Assembly. This will allow design and assembly teams to assess the validity of the design and the influence of design changes and simulate and define assembly procedures.
- Maintenance. This will allow maintenance teams to simulate replacements of parts and assess and train for maintenance procedures of complex assemblies.
- Electronic Handbook. This will support the preparation of electronic manuals for presentation, assembly, maintenance, in a way which provides compact, interactive and user-friendly documentation.
- Interactive Assistance. This will support a direct link between the service department and the customer user to provide assistance with the help of the virtual prototype.
Most of the real world assembly and maintenance tasks are two-handed operations and therefore a globe-based interface, the PHANToM(tm) and a new two-handed input device, will be used to support manual operations with force feedback. This new device will be composed of a LCD display, two 6 dof controllers based on an existing measurement system, and additional buttons. The architecture of the Distributed Environment, which separates local manipulation of cached model data from distribution and synchronisation of changes globally between multiple participants, provides a natural method for structuring the integration of the different applications.
Milestones:
Month 18 - Prototype of the system including four modular applications: an assembly simulation module, a maintenance simulation module, an electronic handbook and an interactive assistance module. These applications will support capabilities as: natural two-handed manipulation (by means of a new device), accurate real-time constraint modelling, deformable geometry and haptic interaction.
Month 24 - Validation of the prototype by the end users that will be able to interact simultaneously with a shared model.
We have shown that nutrient affinity constants for bacteria, autotrophic flagellates and dinoflagellates can be reasonably well predicted using a simple model based on the assumption of diffusion-limited phosphate uptake. This work puts the experimental foundation for model parameterisation on a much more solid ground. Diatoms appear to be an exception from the idealised theory, having a higher affinity than predicted. We suspect this deviation to be caused by the simplifying assumption of spherical cells, an assumption not well suited for many diatoms. Experiments with the ciliate Strombidium sulcatum confirm a direct negative effect of turbulence on growth and feeding. In contrast, our results show little direct influence of turbulence on ciliate growth in natural communities. For the purposes of incorporating turbulence into models of the interactions of planktonic webs, direct effects of turbulence on the ciliate component can safely be omitted.
Experiments of the growth of phototrophic and mixotrophic dinoflagellates subjected to turbulence show further complexities owing to changes in the pH of water and aggregate formation besides the response to nutrient/prey concentrations. This group of organisms shows a high species-specific response to turbulence making experiments with different organisms very valuable. The response of the planktonic community to nutrient additions shows clear differences between the Mediterranean and Norwegian coastal systems and for different initial conditions, subjected to a range of time-scale variability, within a particular system. While in the Norwegian system the relationship between particulate organic carbon (POC) or chlorophyll a increase and nutrient dose was linear, in the Mediterranean system the response to nutrients levelled off at 8 µM nitrate. When data on coastal systems are pooled together, the production of POC shows a two-dimensional dome-shape relationship with respect to turbulence and nutrient load.
This indicates the need to consider turbulence as a variable when assessing nutrient load thresholds in coastal systems. A model that incorporates turbulence effects to the fluxes within a food web shows that the organisms with the largest response are diatoms and mesozooplankton in accordance with theory which states that the bigger planktonic organisms show the largest potential for turbulence to affect nutrient fluxes and prey encounter rate. The development of a new sensor to measure turbulence in the laboratory enhances our research capabilities and improves the competitive edge of the European company NORTEK AS.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias naturales ciencias biológicas microbiología bacteriología
- ingeniería y tecnología ingeniería mecánica ingeniería de vehículos ingeniería automotriz
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información ingeniería electrónica sensores
- ciencias naturales matemáticas matemáticas puras geometría
Para utilizar esta función, debe iniciar sesión o registrarse
Le pedimos disculpas, pero se ha producido un error inesperado durante la ejecución.
Necesita estar autentificado. Puede que su sesión haya finalizado.
Gracias por su comentario. En breve recibirá un correo electrónico para confirmar el envío. Si ha seleccionado que se le notifique sobre el estado del informe, también se le contactará cuando el estado del informe cambie.
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
48930 LAS ARENAS
España
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.