Objectif
Detection of biological agents is critical in many fields related to public health, foods industry, environmental control, water management and clinical and diagnostic analysis. In these fields there is an important need for the development of biosensor systems with low cost, high sensitivity and specificity, ease to transport for in-situ measurements, short analysis time and simple operation (easy handling). All these demand for the development of micromachined devices based in magnetic immunoassay techniques. In this project, microcoils are proposed as inductive transducers for the development of very high sensitivity and low cost biosensor arrays for the above-mentioned wide range of applications. This requires a previous assessment step in order to validate the ability of standard Si micromachining technologies for the proposed devices. Detection of biological agents is critical in many fields related to public health, foods industry, environmental control, water management and clinical and diagnostic analysis. In these fields there is an important need for the development of biosensor systems with low cost, high sensitivity and specificity, ease to transport for in-situ measurements, short analysis time and simple operation (easy handling). All these demand for the development of micromachined devices based in magnetic immunoassay techniques. In this project, microcoils are proposed as inductive transducers for the development of very high sensitivity and low cost biosensor arrays for the above-mentioned wide range of applications. This requires a previous assessment step in order to validate the ability of standard Si micromachining technologies for the proposed devices.
OBJECTIVES
The main objective of this project is the development of micro-inductive Biosensor arrays in standard CMOS Si technology for very high sensitivity detection. These devices are to be integrated in compact systems characterised by their low cost, high sensitivity, simple use, in-situ measuring capability (portability), and easy handling. In a first assessment phase (phase I), the project proposes the development of an integrated inductive sensor with sensitivity to detection of 10 magnetic nanoparticles. At this level, the project is not aimed to the development of a specific biological application, but to the design, fabrication and validation of the magnetic sensor device as integrated transducer. The design of the system includes that of the electronic circuit for the inductance determination of the microcoil, which is critical to achieve the required sensitivity. In a second phase (phase II is the ongoing three years full research project), the optimisation of the devices for the design and development of higher performance integrated sensor arrays to be applied for the high sensitivity detection of a concrete biomolecule will be addressed.
DESCRIPTION OF WORK
The Phase I of the project (assessment phase) is structured in 4 main tasks: 1.Design of the integrated device: Devices will be simulated under conditions modelling the presence of magnetic particles in their nucleus, to determine the geometrical features of the inductance structure. This task will also include the study on the most suited materials for the coils. At a final step, a set of masks will be provided;
2.Technology: Fabrication of the devices will be made in the Clean Room facilities of partner CNM-CSIC using standard CMOS Si technology. Test structures will be integrated in the processed wafers for the validation of the different technology steps;
3.Design and implementation of electronic circuitry: This will be done in direct interaction with task 1, as the structure of the devices and their characteristics strongly condition the optimum signal detection and processing design. This will be done taking into account the characteristics of simplicity, flexibility and sensitivity (noise rejected) of the aimed system. At this stage, circuitry will be implemented in a discrete way;
4.Characterisation of devices: Detection of magnetic particles. At this task, the validation of the devices as inductive sensors will be addressed, determining the characteristics of the system (sensor + electronics) for detection of the magnetic nanoparticles. The proposed goal for this assessment phase is the fabrication of devices with sensitivity down to 10 magnetic nanoparticles.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique capteurs biocapteurs
- sciences médicales et de la santé sciences de la santé santé publique et environnementale
- sciences sociales sociologie gouvernance gouvernance environnementale
- ingénierie et technologie nanotechnologie nanomatériaux
- ingénierie et technologie génie de l'environnement gestion des ressources naturelles gestion de l'eau
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Mots‑clés
Les mots-clés du projet tels qu’indiqués par le coordinateur du projet. À ne pas confondre avec la taxonomie EuroSciVoc (champ scientifique).
Les mots-clés du projet tels qu’indiqués par le coordinateur du projet. À ne pas confondre avec la taxonomie EuroSciVoc (champ scientifique).
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
08007 BARCELONA
Espagne
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.