Objetivo
Most long range telecommunication systems are based on microwave links including high power transmitters on ground stations and on satellites. These satellites will be equipped with 50 to 100 travelling wave tubes (TWTs) within a few years. Due to the rapid growth of telecommunications and saturation of the present frequency bands, new bands will have to be allocated at higher frequencies (30-100 GHz) bringing the present technology close to its limit. Manufacturers are looking for a technological breakthrough to satisfy the need for low cost microwave amplifiers, which will operate at higher frequencies. Cold cathodes using carbon Nanotubes (CNTs) are considered as an ideal starting point. The overall objective of this three years project is to demonstrate that the use of CNT-based cold cathodes (instead of today's hot thermionic cathodes) will lead to a new generation of high frequency (30-100 GHz) compact and low cost vacuum microwave amplifier.
OBJECTIVES
The overall objective of this three years project is to demonstrate that CNT-based cold cathodes can satisfy the future telecommunications requirement for high frequency (30-100 GHz) compact and low cost microwave amplifier. The project itself aims to achieve an emission current density of 1 A/cm2 modulated at 30GHz from a CNT-based cold cathode. The cold cathode will consist of an array of CNTs with an integral extraction grid positioned 5-10 µm from the CNT emitters. The intermediate objectives are the fabrication of arrays of identical and vertically-aligned CNTs and the design/fabrication of low capacitance CNT based field emission cathodes. We shall verify that 1A/cm2 of emission current can be obtained in DC mode from the cathodes, and using a RF modulated input, validate that our device delivers 30 GHz modulated current at a density of 1A/cm2.
DESCRIPTION OF WORK
This project is divided into 7 WPs, namely nanolithographically defined growth of aligned nanotubes (WP1), design and fabrication of cathodes (WP2), field emission properties of cathodes (WP3), properties of nanotube based microwave amplifier (WP4), assessment and evaluation (WP5), dissemination and implementation (WP6), and project management (WP7). WP1 aims to produce arrays of identical and vertically-aligned CNTs. This will be achieved by using a three-pronged approach - precise control of the size and the position of the catalyst dot by nanolithography, selection of a high temperature diffusion barrier for high yield and uniformity, and optimisation of growth parameters to obtain selective growth of nanotubes. The objective of WP2 is to fabricate a cathode that integrates the array of CNTs with an extraction grid positioned 5-10 µm away from array. This includes the design of a low capacitance and high transparency extraction grid, and the determination of a suitable technology to integrate the CNTs with the grid to form the compact cathode.WP3 relates to the emission properties of the cathodes. We shall determine the emission current density (~1 A/cm2), emission uniformity, energy distribution of the emitted electrons, and stability/lifetime of the cathodes. WP4 provides the simulations and modelling support for the preliminary design of the microwave vacuum amplifier. An experimental test system will also be set up to measure the emission current density modulated at 30 GHz. WP7 ensures that the project shall be executed in the most effective fashion and the results are fully exploited technologically and commercially. The progress of the project will be measured using the main deliverables: nanolithographically defined growth of aligned CNTs, design and fabrication of CNT-based cathode with capacitance 2-3 pF/mm2, and cathodes delivering 1 A/cm2 emission current densities modulated at 30 GHz.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería mecánica ingeniería de vehículos ingeniería aeroespacial tecnología satelital
- ciencias naturales ciencias químicas catálisis
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información ingeniería de la información telecomunicación
Para utilizar esta función, debe iniciar sesión o registrarse
Le pedimos disculpas, pero se ha producido un error inesperado durante la ejecución.
Necesita estar autentificado. Puede que su sesión haya finalizado.
Gracias por su comentario. En breve recibirá un correo electrónico para confirmar el envío. Si ha seleccionado que se le notifique sobre el estado del informe, también se le contactará cuando el estado del informe cambie.
Palabras clave
Palabras clave del proyecto indicadas por el coordinador del proyecto. No confundir con la taxonomía EuroSciVoc (Ámbito científico).
Palabras clave del proyecto indicadas por el coordinador del proyecto. No confundir con la taxonomía EuroSciVoc (Ámbito científico).
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
92200 Neuilly Sur Seine
Francia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.