Objectif
The detection and prediction of abnormal formation pressure while drilling is critical for the prevention of dangerous blowouts. Moreover, formation pressure data can be used to predict whether accumulations are commercial or non-commercial and also the type of hydrocarbon present.
Experience has shown that with good seismic data, a rough estimation of formation pressure can be obtained. This project proposes an integrated approach that combines the standard prediction technique from velocity analysis with a priori geological information, basin modelling and inversion while drilling, waveform (seismic) analysis relating amplitude information to fluid pressure, and well log calibration.
The area under investigation is located in the northern Viking Graben on the Norwegian continental shelf where overpressure is encountered, and where a comprehensive database of quality data will be made available for the project. In order to properly synthesise the data geological cellular models will be created, on a sub-basin scale, incorporating a variety of attributes including lithologies, porosity-permeability and seismic velocities. Models will include sedimentological and fault data, derived from well log and seismic interpretation.
The solution of the problem requires a fundamental understanding of the basic rock physics of overpressured sediments. For instance, shale and sand show a completely different behaviour under pressure. Significant improvements in seismic acquisition and processing enable energy loss to be measured, leading to the correlation of low velocity and high loss zones with over-pressuring. This phase of the project will define the precise relationships between seismic velocity, anisotropy, attenuation and effective pressure for a wide range of lithologies from laboratory measurements. Then, an appropriate model relating anelastic properties and formation pressure allows, in principle, the monitoring of overpressure from seismic data. The sensitivity of seismic data to formation pressure will be investigated through the generation of full waveform seismograms and amplitude versus offset (AVO) analysis.
The geological and rock physics a priori information is integrated in a novel method for the estimation of pore pressure, in which a procedure for basin modelling and inversion permits the determination of locally valid compaction relations for the sediment column and the inclusion of measurements while drilling data (MWD) including drill-bit VSP data for updating the ahead-of-the-bit prediction
It is expected that after completion of the this 3 year project, two years will be required to test the technique and make it user-friendly on a PC or UNIX workstation environment. However, an earliest possible exploitation of the result will be assured by the active participation of an operating oil company and by project coordination from a well service contractor.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles sciences de la Terre et sciences connexes de l'environnement géologie lithologie
- sciences naturelles informatique et science de l'information bases de données
- sciences naturelles sciences chimiques chimie organique hydrocarbures
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
5061 Kokstad
Norvège
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.