Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch Deutsch
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2024-05-07

Detection of over pressure zones from seismic and well data

Ziel



The detection and prediction of abnormal formation pressure while drilling is critical for the prevention of dangerous blowouts. Moreover, formation pressure data can be used to predict whether accumulations are commercial or non-commercial and also the type of hydrocarbon present.
Experience has shown that with good seismic data, a rough estimation of formation pressure can be obtained. This project proposes an integrated approach that combines the standard prediction technique from velocity analysis with a priori geological information, basin modelling and inversion while drilling, waveform (seismic) analysis relating amplitude information to fluid pressure, and well log calibration.

The area under investigation is located in the northern Viking Graben on the Norwegian continental shelf where overpressure is encountered, and where a comprehensive database of quality data will be made available for the project. In order to properly synthesise the data geological cellular models will be created, on a sub-basin scale, incorporating a variety of attributes including lithologies, porosity-permeability and seismic velocities. Models will include sedimentological and fault data, derived from well log and seismic interpretation.

The solution of the problem requires a fundamental understanding of the basic rock physics of overpressured sediments. For instance, shale and sand show a completely different behaviour under pressure. Significant improvements in seismic acquisition and processing enable energy loss to be measured, leading to the correlation of low velocity and high loss zones with over-pressuring. This phase of the project will define the precise relationships between seismic velocity, anisotropy, attenuation and effective pressure for a wide range of lithologies from laboratory measurements. Then, an appropriate model relating anelastic properties and formation pressure allows, in principle, the monitoring of overpressure from seismic data. The sensitivity of seismic data to formation pressure will be investigated through the generation of full waveform seismograms and amplitude versus offset (AVO) analysis.

The geological and rock physics a priori information is integrated in a novel method for the estimation of pore pressure, in which a procedure for basin modelling and inversion permits the determination of locally valid compaction relations for the sediment column and the inclusion of measurements while drilling data (MWD) including drill-bit VSP data for updating the ahead-of-the-bit prediction

It is expected that after completion of the this 3 year project, two years will be required to test the technique and make it user-friendly on a PC or UNIX workstation environment. However, an earliest possible exploitation of the result will be assured by the active participation of an operating oil company and by project coordination from a well service contractor.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

CSC - Cost-sharing contracts

Koordinator

Well Service Technology A/S
EU-Beitrag
Keine Daten
Adresse
61,Kokstaddalen
5061 Kokstad
Norwegen

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten

Beteiligte (4)

Mein Booklet 0 0