European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-04-30

New components to achieve higher quality and cost reduction of PV-modules

Objetivo



State of the art PV-module lamination has some disadvantages :
- Six different layers to handle, to cut, to lay up in staple - Protective laminates including aluminium foil have the advantage of full moisture barrier but the disadvantage of causing electrical problems (short circuits, break down)
- Low moisture barrier of standard protective laminates
- Long cycle time of the laminating process.

To overcome these advantages the objectives of this project are :
- New moisture barrier layers by coating of dielectrics (SiO, mixed oxides with MgO etc) on suitable substrates.
- Incorporation of these barrier layers to integrated encapsulating composites, which include fast curing encapsulating EVA by direct extrusion of EVA onto the protective laminate.
- Further new materials and systems for a low cost encapsulation process without glass will be investigated.

The new products will be at lower cost and the new lamination process will need only 50% of time.
This will lower cost of module lamination up to 30% and increase productivity. A realization time interval of 2 to 3 years into industrial scale is expected after successful completion of the project.

Convocatoria de propuestas

Data not available

Régimen de financiación

CSC - Cost-sharing contracts

Coordinador

ISOVOLTA OESTERREICHISCHE ISOLIERSTOFFWERKE AG
Aportación de la UE
Sin datos
Dirección
20,Vianovastrasse 20
8402 WERNDORF BEI GRAZ
Austria

Ver en el mapa

Coste total
Sin datos

Participantes (5)