Objectif
PROJECT OBJECTIVES
The main objective of this project is to improve the combustion stability for small and medium sized biomass fired boilers aimed for small district heating networks. Investigated boilers in the thermal output range of 0.5 to 10 MW, show too high levels of harmful emissions at low and at varying loads and different ways to overcome this problem will be investigated within the project. This includes the development, design and construction of different combustion units to improve the conditions under which the combustion takes place. New means to monitor and control the combustion is included in the project and software will be developed to better describe the combustion process. The improvements will be verified by measurements and the different approaches compared by their impact efficiency and emissions of NOx, VOC and particles over the entire load range.
SCIENTIFIC APPROACH
Three different combustion units will be designed and constructed in order to maintain high combustion stability at low and at varying load, namely: - pulsating combustion with a 500 kW prototype boiler - stationary vortex combustion with acoustic stimulation in a 150 kW boiler - 500 kW boiler with partitioned combustion chamber and heat storage. New and low-investment equipment to monitor the combustion process will be used together with simplified simulation software, fast enough to be utilised in the control system for boilers of actual size. Software to simulate the pyrolysis and gasification of fuels on the bed will be developed and the software CFX together with developed routines for the combustion of the gas phase will be used to predict the influence from geometry and boundary conditions on the formation of harmful emissions.
EXPECTED ACHIEVEMENTS AND EXPLOITATION
After completion of the project, different ways to overcome the problems identified when boilers are run at low and at varying loads will be demonstrated. New biomass fired boiler concepts, new and inexpensive control equipment and reliable simulation tools will be made available to boiler manufacturers and to energy utilities, thereby speeding up the changeover from fossil to biomass fuels and making it possible to reduce emissions of CO2 without increasing other harmful emissions. It is expected that after the end of the project two years are needed to transform the results into fully developed industrial products for the market.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique système d’automatisation et de contrôle
- ingénierie et technologie génie mécanique ingénierie thermodynamique génie thermique
- sciences naturelles mathématiques mathématiques pures géométrie
- ingénierie et technologie génie de l'environnement énergie et combustibles
- sciences naturelles informatique et science de l'information logiciel logiciel d’application logiciel de simulation
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
971 87 Luleä
Suède
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.