Obiettivo
PROJECT OBJECTIVES
The main objective of this project is to improve the combustion stability for small and medium sized biomass fired boilers aimed for small district heating networks. Investigated boilers in the thermal output range of 0.5 to 10 MW, show too high levels of harmful emissions at low and at varying loads and different ways to overcome this problem will be investigated within the project. This includes the development, design and construction of different combustion units to improve the conditions under which the combustion takes place. New means to monitor and control the combustion is included in the project and software will be developed to better describe the combustion process. The improvements will be verified by measurements and the different approaches compared by their impact efficiency and emissions of NOx, VOC and particles over the entire load range.
SCIENTIFIC APPROACH
Three different combustion units will be designed and constructed in order to maintain high combustion stability at low and at varying load, namely: - pulsating combustion with a 500 kW prototype boiler - stationary vortex combustion with acoustic stimulation in a 150 kW boiler - 500 kW boiler with partitioned combustion chamber and heat storage. New and low-investment equipment to monitor the combustion process will be used together with simplified simulation software, fast enough to be utilised in the control system for boilers of actual size. Software to simulate the pyrolysis and gasification of fuels on the bed will be developed and the software CFX together with developed routines for the combustion of the gas phase will be used to predict the influence from geometry and boundary conditions on the formation of harmful emissions.
EXPECTED ACHIEVEMENTS AND EXPLOITATION
After completion of the project, different ways to overcome the problems identified when boilers are run at low and at varying loads will be demonstrated. New biomass fired boiler concepts, new and inexpensive control equipment and reliable simulation tools will be made available to boiler manufacturers and to energy utilities, thereby speeding up the changeover from fossil to biomass fuels and making it possible to reduce emissions of CO2 without increasing other harmful emissions. It is expected that after the end of the project two years are needed to transform the results into fully developed industrial products for the market.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sistemi di controllo
- ingegneria e tecnologia ingegneria meccanica ingegneria termodinamica ingegneria termica
- scienze naturali matematica matematica pura geometria
- ingegneria e tecnologia ingegneria ambientale energia e carburanti
- scienze naturali informatica e scienze dell'informazione software software applicativi software di simulazione
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
971 87 Luleä
Svezia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.