Objetivo
Evaluation of the potential of different deposition techniques with regard to reproducibility and robustness for future production of high-efficiency CdTe thin film solar cells.
The main advantage of catalytic combustion is the low thermal nitrogen oxides emission due to the low operating temperature. Many tests have been performed successfully with clean fuels, and a hybrid catalytic and staged combustion technique is also able to burn fuels containing high amounts of nitrogen with low nitrogen oxides emission levels and a combustion efficiency comparable to conventional burners.
In gas turbine applications, a catalytic combustor can lower emissions of nitrogen oxides to less than about 2 parts per million. Catalytic combustion can also burn mixtures whose combustible concentration is below the lean mixture limit of gas phase reactions. This feature leads to an easier control of the rate of production of thermal energy.
Considerable improvements are required before these techniques can be considered for large scale applications including:
reduction of methane losses;
development of cheap and thermostable combustion catalysts;
increasing the temperature stability of the catalysts;
improvement of the fuel preparation and injection systems.
An evaluation has been made of the potential of different deposition techniques with regard to reproducibility and robustness for future production of high efficiency cadmium tellurium thin film solar cells.
The eventual production of a cadmium tellurium thin film solar cell can only be envisaged, if materials and production techniques are cheap enough. This means that the use of the semiconductor material must be made efficient by using thin films and efficient deposition technologies and cheap substrates. Past work and evaluations have shown that this is possible. More of a question arises with respect to deposition technology. Here, a robust process will be required, which leads to a high production efficiency under not too stringent (and thereby expensive) process control. The control bandwidth of all essential parameters for reliable production of high efficiency solar cells should be as wide as possible.
Research so far has resulted in an efficiency of 12% in a cadmium tellurium cadmium selenium CdTe-CdSe heterojunction cell. This process uses cheaper material and is more suitable for mass production and is within the economic limits. Safety aspects can be resolved and the set up of a production plant is under discussion.
The eventual production of a CdTe thin film solar cell can only be envisaged, if materials and production techniques are cheap enough for realization of the final aim of <<1ECU/Wp. This means, that the use of the semiconductor material is made materials' efficient by using thin films and materials' efficient deposition technologies and cheap substrates. Past work and evaluations have shown that this is possible. More of a question arises within the scope of deposition technology. Here, a robust process will be required, which leads to a high production efficiency under not too stringent - and thereby expensive - process control. The control bandwidth of all essential parameters for reliable production of high-efficiency solar cells should be as wide as possible.
This latter technological aspect, besides special development work, such as improving doping and contacting of CdTe, is the central focus of the proposed joint effort. A close cooperation and evaluation of results therefore is essential for the expected success of the work.
In the following the tasks of the individual research groups are listed:
Task 1) COORDINATION AND EVALUATION (Battelle Institut e.V.)
Task 2) CLOSE-SPACED SUBLIMATION (Battelle Institut e.V.) not financed by the EC
Task 3) HIGH VACUUM EVAPORATION AND GALVANIC DEPOSITION (Newcastle- upon-Tyne polytechnic)
Task 4) DOPING AND CONTACTING OF CdTe BY ION-ASSISTED TECHNOLOGY (Istituto Nazionale di Fisica Nucleare)
Task 5) METALORGANIC CHEMICAL VAPOUR DEPOSITION (University of Durham)
Task 6) SCREEN PRINTING OF CdTe (University of Ghent)
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias naturales ciencias químicas química inorgánica metales de transición
- ingeniería y tecnología ingeniería de materiales recubrimiento y películas
- ciencias sociales economía y empresa ciencia económica economía de la producción
- ingeniería y tecnología ingeniería ambiental energía y combustibles
- ciencias naturales ciencias químicas química inorgánica metaloides
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Datos no disponibles
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
NE1 7RU Newcastle upon Tyne
Reino Unido
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.