Objectif
The aim of the projec t is to determine the influence of alloying elements on the texture development in 3 various Al-Li model alloys. The programme includes 3 parts: Theoretical and experimental studies of rolling texture development: rolling experiments on technical and large grainsize alloys to determine the slip systems, slip inhomogeneities and lattice reorientations of individual grains. Experimental study of texture evolution during heat treatment. Plastic anisotropy will be investigated. The ultimate aim is to provide a method for predicting the mechanical properties of highly textured alloys as occurring in Al-Li.
The aim of the project is to determine the influence of alloying elements on the texture development in 3 various aluminium lithium model alloys. The programme is in 3 sections:
theoretical and experimental studies of rolling texture development rolling experiments on technical and large grain size alloys to determine the slip systems, slip inhomogeneities and lattice reorientations of individual grains;
experimental study of texture evolution during heat treatment;
measurements of plastic anisotropy and comparison with anisotropy data calculated from textures.
The ultimate aim was to provide a method for predicting the mechanical properties of high textures alloys which occur in aluminium lithium alloys.
Bands of 3 alloys have been prepared by casting and hot extrusion followed by hot rolling or cold rolling to various thicknesses. Some of these bands were subjected to a further heat treatment. At each stage detailed texture measurements were made by X-ray pole figures and orientation distribution functions (ODF). Tensile tests on hot rolled samples have been carried out to determine the Lankford coefficient R and the yield stress sigma y. The results reveal a pronounced R (alpha) anisotropy; after hot rolling R is very low alpha = 0 degrees and it then increases to over 1 at 45 degrees and then decreases to +/- 0.5 at 90 C. The R and sigma y values could also be calculated using the texture data. To examine in greater detail the mechanisms of rolling texture development, a sample with grains of 3 mm diameter was deformed in plain strain compression and the orientations of 26 individual grains were measured. The lattice rotations of the grains were also compared with the different theoretical predictions according to Taylor type models (full and relaxed constraints) of the grain deformations.
THE PROGRAMME IS AIMED AT DETERMINING THE INFLUENCE OF ALLOYING ELEMENTS ON THE DEVELOPMENT OF FORMATION AND RECRYSTALLISATION TEXTURES IN AL-LI ALLOYS. THE PROGRAMME INCLUDES 3 PARTS AS FOLLOWS:
1.- THEORETICAL AND EXPERIMENTAL STUDIES OF DEFORMATION (ROLLING) TEXTURE DEVELOPMENT: - ROLLING EXPERIMENTS ON TECHNICAL AND LARGE-GRAINED AL-LI ALLOYS TO FOLLOW THE SLIP SYSTEMS, SLIP HOMOGENEITY AND LATTICE REORIENTATIONS OF INDIVIDUAL GRAINS.
2.- EXPERIMENTAL STUDY OF TEXTURE EVOLUTION DURING HEAT TREATMENT OF DEFORMED AL-LI AND AL-LI-ZR ALLOYS.
3.- PLASTIC ANISOTROPY WILL BE INVESTIGATED.
THE ALLOYS TO BE EXAMINED ARE THE FOLLOWING
- AL-O,7 LI A SOLID SOLUTION
- AL-2 LI A SOLID PRECIPITATE AGE HARDENABLE ALLOY
- AL 2 LI-O,1 ZR AS ABOVE WITH ZR
- AL 2 LI- 2 CU- O,1 ZR TO SPECIFY THE ROLE OF CU AND FACILITATE THE EXTENSION TO MORE INDUSTRIAL ALLOYS.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences agricoles agriculture, sylviculture et pêche agriculture céréales et oléagineux
- sciences naturelles sciences chimiques chimie inorganique métal alcalin
- sciences naturelles sciences chimiques chimie inorganique métal pauvre
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Données non disponibles
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
52056 AACHEN
Allemagne
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.