Objetivo
Within the scope of this research, a new approach for tool wear monitoring during turning was tested successfully. It was demonstrated, that the beginnings of tool wear can be detected with relative sensitivity using a broadband acoustic emission (AE) detection, short transmission paths and the extraction of disturbance signals caused by collisions between the chips and the tool.
An essential result of this research concerns the sources of AE during the turning process. The examination of the signal transmission from the workpiece to the tool suggests that the interactions at the contact area between the workpiece and the tool are the most important AE sources, ie the sources within the workpiece itself can be neglected. Furthermore, a new theoretical approach to the general of AE during turning has been evolved. This approach starts from the assumption that the essential AE sources during turning result from the friction at the contact area between the workpiece and the tool. The present experimental results prove this model, ie the model makes correct predictions on the AE behaviour, where other theories fall (eg independence of AE from the feed per revolution).
In the examined case, tool wear monitoring during drilling could be performed relatively simply by an evaluation of the average signal level (ASL value). It has to be ascertained, if this result can be generalised.
A new measuring technique for tool wear monitoring during turning has been developed. The technique makes possible the early detection of tool wear (flank or crater wear as well as cutting edge chippings) during the machining process and before tool breakage. The use of this monitoring technique makes better utilization of tool life and can lead to the avoidance of tool breakage by accurately predicting when a tool change is necessary. The measuring technique is based on the analysis of acoustic emission (AE) signals generated by machining processes. The new method of analysis is based on a physical model, which correlates quantitatively AE and tool wear parameters.
THE OBJECTIVE IS TO APPLY ACOUSTIC EMISSION (AE) TECHNIQUES TO THE AUTOMATIC TOOL MONITORING FOR TURNING, DRILLING AND GRINDING. MOREOVER THE NEW AE-SYSTEM HAS TO BE INTEGRATED IN A COMPUTER AIDED ON-LINE TESTING SYSTEM. STEPS ARE:- TO DEVELOP AE AS A TESTING METHOD WHICH IS ABLE TO GAIN ON-LINE INFORMATION ON THE EXTEND OF TOOL WEAR, CHIP-FORMATION AND MICRO-FRACTURE ON THE CUTTING-EDGE
- TO SEPARATE THESE PARAMETERS
- FIRST FOR TURNING, SECOND FOR DRILLING AND GRINDING
- AT LAST EXPERIMENTS UNDER REAL INDUSTRIAL CONDITIONS TO DEMONSTRATE AND TO PROVE THE CAPABILITY OF THE DEVELOPED AE-SYSTEM.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería mecánica ingeniería de fabricación fabricación sustractiva
- ciencias sociales ciencias políticas transiciones políticas revoluciones
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Datos no disponibles
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
70049 STUTTGART
Alemania
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.