Obiettivo
Within the scope of this research, a new approach for tool wear monitoring during turning was tested successfully. It was demonstrated, that the beginnings of tool wear can be detected with relative sensitivity using a broadband acoustic emission (AE) detection, short transmission paths and the extraction of disturbance signals caused by collisions between the chips and the tool.
An essential result of this research concerns the sources of AE during the turning process. The examination of the signal transmission from the workpiece to the tool suggests that the interactions at the contact area between the workpiece and the tool are the most important AE sources, ie the sources within the workpiece itself can be neglected. Furthermore, a new theoretical approach to the general of AE during turning has been evolved. This approach starts from the assumption that the essential AE sources during turning result from the friction at the contact area between the workpiece and the tool. The present experimental results prove this model, ie the model makes correct predictions on the AE behaviour, where other theories fall (eg independence of AE from the feed per revolution).
In the examined case, tool wear monitoring during drilling could be performed relatively simply by an evaluation of the average signal level (ASL value). It has to be ascertained, if this result can be generalised.
A new measuring technique for tool wear monitoring during turning has been developed. The technique makes possible the early detection of tool wear (flank or crater wear as well as cutting edge chippings) during the machining process and before tool breakage. The use of this monitoring technique makes better utilization of tool life and can lead to the avoidance of tool breakage by accurately predicting when a tool change is necessary. The measuring technique is based on the analysis of acoustic emission (AE) signals generated by machining processes. The new method of analysis is based on a physical model, which correlates quantitatively AE and tool wear parameters.
THE OBJECTIVE IS TO APPLY ACOUSTIC EMISSION (AE) TECHNIQUES TO THE AUTOMATIC TOOL MONITORING FOR TURNING, DRILLING AND GRINDING. MOREOVER THE NEW AE-SYSTEM HAS TO BE INTEGRATED IN A COMPUTER AIDED ON-LINE TESTING SYSTEM. STEPS ARE:- TO DEVELOP AE AS A TESTING METHOD WHICH IS ABLE TO GAIN ON-LINE INFORMATION ON THE EXTEND OF TOOL WEAR, CHIP-FORMATION AND MICRO-FRACTURE ON THE CUTTING-EDGE
- TO SEPARATE THESE PARAMETERS
- FIRST FOR TURNING, SECOND FOR DRILLING AND GRINDING
- AT LAST EXPERIMENTS UNDER REAL INDUSTRIAL CONDITIONS TO DEMONSTRATE AND TO PROVE THE CAPABILITY OF THE DEVELOPED AE-SYSTEM.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria meccanica ingegnerizzazione dei prodotti produzione sottrattiva
- scienze sociali scienze politiche transizioni politiche rivoluzioni
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
70049 STUTTGART
Germania
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.